User Guide

1
2
3
4
For Passive 3D Glasses
If Passive 3D Glasses are supplied with your TV, use them. If no glasses are supplied, purchase a pair
of Passive 3D Glasses, model TDG-500P. You can watch in 3D by just putting the Passive 3D Glasses
on.
For Active 3D Glasses
If Active 3D Glasses are supplied with your TV, use them. If no glasses are supplied, purchase a pair of
Active 3D Glasses, model TDG-BT500A. Before using the Active 3D Glasses for the first time, you
need to register them to your TV. Follow the steps below.
Remove the battery’s insulation sheet.
Turn the TV on, then hold the glasses within 50 cm (1.6 ft.) of the TV.
Press and hold the (Power) button/indicator on the glasses for 2 seconds.
The Active 3D Glasses turn on and registration starts (the (Power) button/indicator
blinks green and yellow). When registration is finished, a message appears in the TV
screen for 5 seconds, and the indicator lights up in green for 3 seconds.
If registration fails, the Active 3D Glasses will turn off automatically. In this case, repeat
the procedure above.
Put the Active 3D Glasses on.
19