Operating Instructions

10
Sound Settings
Optimized sound setting
based on your vehicle
This system provides clear treble and
powerful bass optimized for the vehicle type
by setting the DSP master unit. 18 different
settings are available.
Warning
• Avoid touching the top of the DSP master unit
when setting the switches, as it becomes hot
during use.
Notes
• Set the sound of the car audio unit (BASS/
TREB/Loudness, etc.) to the flat position.
• Set the switches on the front panel of the DSP
master unit with your fingers. Do not use any
tools when setting these switches.
SW LOCATION switch
Select from one of three positions (FAR/
MID/NEAR) based on the distance between
the driver’s seat and where the subwoofer is.
TRUNK switch
Select “Y” (yes) or “N” (no) based on
whether the subwoofer is mounted in the
trunk.
If the subwoofer is mounted in the trunk,
select “Y.”
VEHICLE SIZE switch
Select from one of three sizes (L/M/S) based
on the air volume of your car.
See the following examples.
Compact hatchback
Middle sized sedan
Pickup Truck
Full sized SUV
SW LOCATION: MID
TRUNK: N
VEHICLE SIZE: S
SW LOCATION: MID
TRUNK: Y
VEHICLE SIZE: M
SW LOCATION: NEAR
TRUNK: N
VEHICLE SIZE: S
SW LOCATION: FAR
TRUNK: N
VEHICLE SIZE: L