Operating Instructions FM/MW/LW Cassette Car Stereo XR-C8220R XR-C7220R

21
1 Press (SHIFT).
2 Press (3) (SET UP) repeatedly until the
desired item appears.
Each time you press (3) (SET UP), the item
changes as follows:
Clock n CT n D.Info*
1
n Amber/Green n
Dimmer n Contrast n Voice*
1, 3
n Beep n
RM n L.out*
2, 3
n Loud*
1
n LPF*
1, 3
n
M.dspl n English/Spanish*
1, 3
n A.Scrl*
1
*
1
When the radio is off, or when no tape, CD,
or MD is playing, this item will not appear.
*
2
When the optional equalizer preamplifier is
not connected, this item will not appear.
*
3
XR-C8220R only
3 Press (5) (n) to select the desired
setting (Example: on or off).
For the “Contrast” setting, pressing (5)
(n) makes the contrast higher, and
pressing (2) (N) makes the contrast lower.
4 Press (SHIFT).
After the mode setting is complete, the
display returns to normal playback mode.
Adjusting the frequency
of the subwoofer(s)
(XR-C8220R only)
To match the characteristics of the connected
subwoofer(s), you can cut out the unwanted
high and middle frequency signals entering
the subwoofer(s). By setting the cut-off
frequency, the subwoofer(s) will output only
low frequency signals so you can get a clearer
sound image.
1 Press (SOURCE) to select a source (radio,
tape, CD, or MD).
2 Press (SHIFT), then press (3) (SET UP)
repeatedly until “LPF off” appears.
continue to next page n
Changing the sound and
display settings
The following items can be set:
•Clock (page 7)
•CT (Clock Time) (page 18)
•D.Info (Dual Information)*
1
– to display the
clock and the play mode simultaneously (on),
or to display the information alternately (off).
•Amber/Green – to change the illumination
colour to amber or green.
•Dimmer – to change the brightness of the
display.
— Select “Auto” to dim the display only
when you turn the interior lights on.
— Select “on” to dim the display.
— Select “off” to deactivate Dimmer.
•Contrast – to adjust the contrast if the
indications in the display are not
recognizable because of the unit‘s installed
position.
•Voice guide*
1, 3
function for vocalized
comments.
— Select “Voice 1” to minimize the volume
of the guide.
— Select “Voice 2” to choose a louder
volume than “Voice 1.”
— Select “Voice 3” to maximize the volume
of the guide.
— Select “Voice off” to deactivate the Voice
guide.
•Beep – to turn the beep sounds on or off.
•RM (Rotary Commander) – to change the
operative direction of the controls of the
rotary commander.
— Select “norm” to use the rotary
commander in the factory-set position.
— Select “rev” when you mount the rotary
commander on the right hand side of the
steering column.
•L.out (Line Output)*
2, 3
(page 22)
•Loud (Loudness)*
1
– to enjoy bass and treble
even at low volumes. The bass and treble will
be reinforced.
•LPF (Low Pass Filter)*
1, 3
•M.dspl (Motion Display) – to turn the motion
display to 1, 2, or off.
•English/Spanish*
1, 3
– to change the vocalized
comments of the Voice guide to English or
Spanish.
•A. Scrl (Auto Scroll)*
1
(page 23)