Marketing Specifications

Two-way design
The Sony® GS series speakers deliver incredible frequency response with outstanding dispersion
and beautifully clear highs thanks to the MRC woofer, so dome tweeter and integrated 2-way
crossover.
Aluminum dome tweeter
The GS series speakers feature an aluminum dome tweeter to deliver incredible high-frequency
response.
6 x 9" MRC woofer
The GS series woofers use Mica Reinforced Cellular (MRC) bers for supremely light and
extraordinarily rigid woofer cones. MRC woofer cones produce exceptional musical transients
with little distortion compared to traditional cone materials.
High energy magnets
The GS series speakers use high energy magnets to control cone travel and power handling.
The midrange woofer uses powerful Ferrite magnet while the aluminum dome tweeter uses rare
earth, compact Neodymium magnets.
Integrated crossover
GS series speakers use precision crossovers to match the frequency response capabilities of the
drivers. The 2-way, 5000 Hz crossover feature a 12 db/oct high-pass lter (HPF) and 6 dB/oct low-
pass lter (LPF) to ensure smooth music transitions.
Bi-amp design
Bi-amp speaker systems use separate power inputs for each component of the 2-way speaker
system. This lets you drive the speaker system with dedicated power for the High Pass (HP) and
Low Pass (LP) channels instead of sharing the power.
Power handling
The XS-GS6920 speakers are rated for 100 Watts, 120 Watts RMS (CEA 2031 rated) and can handle
peak power of 400 Watts.
Specications
Audio
Frequency Response
35-27,000 Hz
Impedance
4 Ohms
Sensitivity (db)
89 +/- 2 dB/1W/1m
General
Magnet
Woofer: Ferrite
Tweeter: Neodymium
Material
Woofer: Mica Reinforced Cellular Fiber
Tweeter: Aluminum
Power
Power Handling Capacity
400 Watts
Rated Input
100 Watts
Weights and Measurements
XS-GS6920
6 x 9" 2-way speakers