user manual

How to use Group Features72
Parking and uptaking a call
It may be that your system does not support this feature for you. If that is
the case, you will not have access to it.
Your terminal must have a key programmed for private park: the Private
park key, or for group park: the Group park key.
• If the LED in the key is off, the park key is empty, no one is parked
• If the LED in the key is flashing, a caller is parked and you can get
back to the parked caller
• If the LED in the key is on, a caller is parked, however you cannot get
back to the parked caller
Park
1 To park a connected call, press the Park
key
Note: If the LED in the key is off, the call
will be parked and you will get a dial tone
If the LED in the key is flashing, the
connected call and the parked call will be
swapped
The connected call is now parked and you
are connected to the formerly parked call
Park
2 To unpark a call, press the Park key of
which the LED is flashing