Cordless Telephone User Manual

Glossary
81
Directory
A list of names and numbers in your
telephone which can be used to call
people or see who is calling you.
Disconnect
If you end a call a call by pressing
the “Disconn.” softkey, you will
immediately hear the dialtone again.
Display
The small screen on your telephone.
You can vary the contrast level of
the screen.
Diversion
If you want to receive your calls
somewhere else, incoming calls can
be diverted to a selected or variable
extension.
Diversion on busy
If this function is switched on your
calls will automatically be directed
to another pre-defined extension if
you are on a call.
Divert to altern. secr
Groupfacility that allows you to
divert your calls, and the calls for
your boss which normally come in
to your telephone, to another pre-
defined extension. A memory key
must be programmed to allow you to
do this.
Do not disturb
Function that blocks your extension
to callers. Incoming calls will be
diverted to the operator. The
function can be toggled on/off.
Doorlamp
If your telephone is wired to control
a doorlamp via the Static-interface,
you can program the following
options:
• Doorlamp when busy
The doorlamp can be
programmed to illuminate when
your telephone is busy.
• Doorlamp (manual)
Pressing the memory key
allocated to this function will
illuminate the doorlamp.
Dooropener
If your telephone is wired to control
the opening of a door via the Static-
interface, pressing the memory key
allocated to this function will
activate the door release mechanism.