Cordless Telephone User Manual

Glossary
86
Metering
If you make a call to an external
destination, the call may be metered
to record the cost and duration of the
call.
Microphone mute
Muting the telephone microphone
prevents the other party from
hearing you. This function is
controlled by the Micr. mute key.
Status depends upon how you are
using the telephone, and is indicated
in the LED as follows:
• LED off: The microphone in the
telephone is not on - because the
telephone is idle or you are using
the handset
• LED flashing: The microphone
is blocked and the other party
cannot hear you
• LED on: The microphone in the
telephone is on - you are using
the telephone handsfree.
N
Night mode
Facility for diverting all calls to a
specified extension, usually the
security duty officer’s extension.
Any extension can be pre-
programmed as a night extension.
No access to programmed issues
See Lock types.
Notice
Facility for leaving a short line of
text displayed on your telephone and
on the telephone of anyone who
calls you. A Notice can be stored on
your telephone and displayed as
required. A maximum of twenty
characters can be used.
O
Off-hook
The handset has been lifted from its
cradle.
Off-line
You are not busy on a call.
Offline number preparation
You can key in a number before you
lift the handset or press the
loudspeaker key to set up the call.
OK key
Press this key to accept the
displayed or newly entered
information.
One key call setup
If this facility is on, pressing a
speeddial key or groupfacility key
will immediately lead to the
programmed number being called
handsfree.