Cordless Telephone User Manual

Glossary
90
in/output, e.g. to an answering
machine.
• TAPI (speech via telephone);
speech uses the handsfree
function, the handset or headset
connected to the telephone (for
example, dialler).
Three party conference
You can set up a call between
yourself and two other parties. All
parties can hear each other.
Toggle list
This is a list of functions which can
be switched on or off.
U
User mode
This is the default mode for your
telephone. If your telephone is in
Special mode, you can switch it
back to User mode by pressing the
“User Mode” softkey.
V
View Party
You can display the number (and
name if the calling party is in your
directory) of both parties involved
with you in a 3-party call.
Voice Out
Softkey by means of which you can
choose the required voice output
medium.
Voice output medium
The medium used to make calls.
These are:
• Handset with hookswitch
• Handset without hookswitch
• Headset.
Volume keys
These keys control the volume of the
loudspeaker, the ringer and the
handset.
X
X-inp. inst. of mic.
The X- interface is used to connect
additional equipment such as a
recording machine. The X-input
instead of microphone function has
to be switched on and off via a
programmed function key. It is used
to switch between the voice input of
the audio interface and built in
microphones.