Installation Guide

Installation
Instructions
SOSS 204SOSS 203
1 Lay paper template on edge of door as shown in Figure 1, with template
corresponding to mark you made in measuring proper distance from top of door.
2 Fold template on dashed line over edge of pull-to-open side of door. Punch hole
through drill point cross hairs to mark their location on door.
3 Using router or drill of proper size, bore holes to required depth as shown
in Figure 2. Consult table for this dimension.
4 Using router or chisel, remove wood to connect holes for smooth mortise.
5 Insert one-half of the hinge into door mortise.
6 Drill pilot holes for screws. Use No. 51 (.0670") drill bit for soft wood or No. 39 (.0995")
for hard wood. Use #2 phillips screwdriver for enclosed #7 x 1
1
/4" wood screws.
7 Repeat above steps to install hinge in jamb.
8 Lubrication may be used if necessary.
NOTE: Do not hammer or force hinge.
(FOLD ON LINE)
1 Lay paper template on edge of door as shown in Figure 1, with template
corresponding to mark you made in measuring proper distance from top of door.
2 Fold template on dashed line over edge of pull-to-open side of door. Punch hole
through drill point cross hairs to mark their location on door.
3 Using router or drill of proper size, bore holes to required depth as shown
in Figure 2. Consult table for this dimension.
4 Using router or chisel, remove wood to connect holes for smooth mortise.
5 Insert one-half of the hinge into door mortise.
6 Drill pilot holes for screws. Use No. 52 (.0635") drill bit for soft wood or No. 44 (.0860")
for hard wood. Use #2 phillips screwdriver for enclosed #6 x 1" wood screws.
7 Repeat above steps to install hinge in jamb.
8 Lubrication may be used if necessary.
NOTE: Do not hammer or force hinge.
(FOLD ON LINE)
Model Dimensions Drill Min-Max Wood
A B C E Size Thickness
100
1
/4"
1
/2" 1"
3
/32"
3
/8"
1
/2" -
47
/64"
101
7
/32"
1
/2" 1
11
/16"
3
/32"
3
/8"
1
/2" -
47
/64"
103
7
/32"
5
/8" 1
1
/2"
1
/8"
1
/2"
3
/4" -
63
/64"
203
3
/16"
3
/4” 1
3
/4"
1
/8"
1
/2"
3
/4" -
63
/64"
204
1
/4"
3
/4" 2
3
/8"
1
/8"
1
/2"
3
/4" -
63
/64"
303
_
5
/8" 1
1
/2"
1
/8"
1
/2"
11
/16" -
63
/64"
E
A
B
C
Router Guides available for the following
hinges. Use these guides for fast, easy
installation with professional results.
Hinge # Guide # Cost Each
101 101-IT $30.00
103 103-IT $30.00
203 203-IT $30.00
204 204-IT $30.00
Prices include shipping & handling.
Check guide # desired:
101-IT 103-IT 203-IT 204-IT
FIG. 1
FIG. 2