HD1BT AM/FM/RBDS/WB/USB/AUX-IN/BT/iPod Ready/SiriusXM Heavy Duty Radio Installation and Operation Manual
HD1BT CONTENTS Introduction............................................................................................................................... 1 Safety Information .................................................................................................................... 2 Installation ................................................................................................................................ 3 Wiring .................................................................
HD1BT INTRODUCTION System Features Optional Accessories Features of Jensen HD1BT mobile audio system include: Full Dot Matrix LCD AM/FM US/EURO Tuner with 30 Presets (12AM, 18FM) RBDS (Radio Broadcast Data Service) with PTY Search SiriusXM Radio Ready (SiriusXM tuner and Subscription sold separately) USB Playback of MP3 and WMA files iPod Ready (USB Interface) Weatherband Tuner with SAME Technology Mute Bluetooth (Supports A2DP, AVRCP and ID3) Pre-set Equalizer – 5 settings (User, Fla
HD1BT SAFETY INFORMATION When Driving Keep the volume level low enough to be aware of the road and traffic conditions. When Washing Your Vehicle Do not expose the product to high pressure wash. Moisture can cause electrical shorts, fire or other damage. When Parked Parking in direct sunlight can produce very high temperatures. Give the interior a chance to cool down before starting playback. Use the Proper Power Supply This product is designed to operate with a 12 volt DC negative ground battery system.
HD1BT INSTALLATION Before you Begin 4. 1. 5. 2. Disconnect Battery Before you begin, always disconnect the battery negative terminal. Remove Transport Screws Removing the Unit Important Notes To remove the radio after installation, remove mounting hardware securing unit to the vehicle and then pull the radio out. Before final installation, test the wiring connections to make sure the unit is connected properly and the system works.
HD1BT WIRING WARNING! Do not connect the +12VDC ACC switched wire to the battery. This wire MUST be connected to the Accessory/Ignition wire or a +12 volts switched power source.
HD1BT BASIC OPERATION NOTE: SiriusXM (SXM) mode will be skipped when the Region menu option is set to “EURO”. Reset The reset button should be activated for the following reasons: Initial installation of the unit when all wiring is completed Function buttons do not operate Error symbol on the display Use a ball point pen or thin metal object to press the RESET button (11). This may be necessary should the unit display an error code.
HD1BT Loudness Press the AUDIO/MENU button (12) to enter LOUDNESS selection. Then press the VOL +/buttons to toggle loudness on/off. When listening to music at low volumes, this feature will boost the bass and treble ranges to compensate for the characteristics of human hearing. System Menu 1. Press and hold the AUDIO/MENU button (12) for more than 2 seconds to enter the system menu. The first menu item, “Key Beep”, will appear on the display. 2.
HD1BT TUNER OPERATION Automatically Store / Preset Scan (AS/PS) Automatically Store Select an AM or FM band. Press and hold the AS/PS button (15) for more than 2 seconds to automatically select 18 strong stations (12 for AM). “Storing Presets” appears on the screen and the new stations replace any stations already stored. Preset Scan Select a band. Press AS/PS (15) to scan stations stored in the current band. The unit will pause for 5 seconds at each preset station.
HD1BT Weather Band Operation surrounding conditions, weather, obstructions of the signal by hills or mountains, etc. NOAA Weather Alert What is the NOAA Weather Radio/Weatheradio Canada? The Weather Alert function adds an additional level of user safety by automatically switching from any of the available function modes to weather band for a minimum of 60 seconds if a NOAA warning tone (1050 Hz) is received/detected.
HD1BT MP3/USB OPERATION selected song or folder. File Playback Accessing USB Mode Press the MODE button (3) to select USB mode. USB mode will not be selectable unless a USB device is connected. Selecting Tracks Press the >>| (16) or |<< button (18) to advance to the next track/ file. The selected track number will appear on the display. Press and hold the >>| or |<< button to fast forward or fast reverse. Playback begins when the button is released.
HD1BT SIRIUSXMTM RADIO OPERATION Category Tuning 1. 2. 3. 4. Press the PTY/CAT button (2) to access Category mode. While in category mode, press 5/CAT- OR 6/CAT+ buttons (9, 10) to choose a category. Press the |<< / >>| buttons (18, 16) to navigate channels in that category. (The current channel number within the chosen category will always be the default first channel tuned.) Press the ENTER button (17) to select the desired channel.
HD1BT Alternate Display Mode Reset SiriusXM Channel Lock Code Press the VIEW button (13) to change the display information between single and dual line text display. In dual line mode, both artist and title are available for viewing. Press and hold the VIEW button to scroll the Artist/Song Title information. While in category tuning list mode, press the VIEW button in sequence to change the display information from Channel Name, Artist, and Song Title.
HD1BT Advisory Messages Reported by the SiriusXM Vehicle Tuner Table 3: SiriusXM Advisory Messages On-Screen Display Advisory Message Check Antenna Check Antenna Cause Explanation/Solution The radio has detected a fault with the SiriusXM antenna. The antenna cable is either disconnected or damaged. Check Tuner No signal Check Tuner No signal • The radio is having difficulty communicating with the SiriusXM Connect Vehicle Tuner. • The tuner may be disconnected or damaged.
HD1BT On-Screen Display Advisory Message Cause Explanation/Solution Channel Locked Channel Locked The channel that you have requested is Locked by the radio Parental Control feature. See the section on Parental Control, page 45 for more information on the Parental Control feature and how to access locked channels. “Enter Code?” followed by **** Enter Lock Code User prompted to enter the lock/unlock code. Enter the four digit code to play the audio.
HD1BT iPod OPERATION Controlling Playback Pausing Playback During playback, press the ►|| button (2) to pause the iPod player. “Pause” will appear on the LCD. Press ►|| again to resume playback. Repeat Play During playback, press the 1/REPEAT button (5) to repeat the current song. “RPT” will appear on the LCD. Press 1/REPEAT again to stop repeat playback. Random Play During playback, press the 3/RANDOM button (7) to play all songs in the current category in random order.
HD1BT BLUETOOTH OPERATION The HD1BT includes built-in Bluetooth technology that allows you to connect this head unit to Bluetooth devices for streaming audio playback. About Bluetooth Technology BT Device Press Enter Device 1 … … NOTE: Please note that some BT menu options are only available while the unit is in Bluetooth Audio mode.
HD1BT BT Audio (A2DP) The A2DP music is available for Bluetooth enabled phones when the phone is connected. To access Bluetooth mode and play songs stored on your phone, press the MODE button (3). While in Bluetooth mode, the Bluetooth Audio icon will illuminates on the LCD. Selecting Tracks During playback, press the |<< or >>| buttons (18, 16) to play the previous or next track. Pausing Playback During playback, press the ►|| button (2) to pause the Bluetooth AUDIO player.
HD1BT CARE AND MAINTENANCE TROUBLESHOOTING Keep the product dry. If it does get wet, wipe it dry immediately. Liquids might contain minerals that can corrode the electronic circuits. Keep the product away from dust and dirt, which can cause premature wear of parts. Handle the product gently and carefully. Dropping it can damage circuit boards and cases, and can cause the product to work improperly. Wipe the product with a dampened cloth occasionally to keep it looking new.
HD1BT SPECIFICATIONS FCC Notes FM Radio Frequency Coverage (USA) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 87.5 to 107.9 MHz Frequency Coverage (Europe) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 87.5 to 108 MHz Sensitivity (S/N = 30dB) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2.2μV Stereo Separation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
ASA Electronics Corporation www.asaelectronics.com www.jensenheavyduty.com ©2014 ASA Electronics Corporation v.