User's Manual

HD1BT
11
Alternate Display Mode
Press the VIEW button (13) to change the display information between single and dual line text
display. In dual line mode, both artist and title are available for viewing.
Press and hold the VIEW button to scroll the Artist/Song Title information.
While in category tuning list mode, press the VIEW button in sequence to change the display
information from Channel Name, Artist, and Song Title.
Satellite Signal Strength
The display will indicate satellite reception strength as shown below.
Signal Strength
Strength Display
No Signal
Weak
Good
Excellent
Channel Lock
Access Channel Lock through the System Menu under the “SiriusXM Satellite Radio” menu. See
“System Menu” on page 6.
1. Select “Set Lock Code” and press the ENTER button (17).
2. Enter the default lock code of “0000”. To set the lock code:
a. Press the |<< or >>| (18, 16) buttons to enter the first digit of the default code.
b. Press the ENTER button to move to the next digit.
c. Repeat above steps to enter all 4 digits of the default code.
d. Press the |<< or >>| buttons to enter the first digit of the new code.
e. Press the ENTER button to move to the next digit.
f. Repeat above steps to enter all 4 digits.
g. Repeat above steps to confirm the new code.
3. After setting a new four digit code, you can lock channels by entering the “Locked
Channels” menu.
4. Upon entering the Locked Channels list, you will be prompted to enter your four digit code.
a. Press the |<< or >>| buttons to enter the first digit.
b. Press the ENTER button to move to the next digit.
c. Repeat above steps to enter all 4 digits.
5. After entering the code, you can navigate the list using the |<< or >>| buttons to highlight
the channels.
6. Press the ENTER button to Lock (indicated by a icon) or Unlock the selected
channel.
Reset SiriusXM Channel Lock Code
If you forget your Parental Control lock code, use the following directions to reset the code to the
default “0000”. Resetting the lock code will not affect the locked channels list.
1. In SiriusXM mode, tune to Channel 0
2. Set volume to 0.
3. Press Power button (1) to power off the unit.
4. With power off, press and hold the Power button until the system version info is displayed
on the screen
5. Press the Preset 3 button, screen will return to the clock.
6. Press the Power button to power on the unit.
7. The lock code has now been reset to “0000”