User's Manual

ManualsBrandsSounding Audio Industrial ManualsElectronicsAM/FM/RBDS/WB/USB/AUX-IN/BT/iPod Ready/Sirius XM Ready Heavy Duty Radio

HD1BT

BASIC OPERATION

Power On/Off/Radio

Press the POWER button (1) to turn the unit on or press to turn off. The unit will resume at the

last mode selected (Tuner, Auxiliary, etc.).

Volume Control

To increase the volume, press Vol+ (20). To decrease the volume, press Vol- (22). While

adjusting the volume, the LCD displays a bar graph and numerical representation of the level.

The maximum volume setting is 40.

Mute

Press the ►|| button (2) to mute the audio output. Press ►|| again to restore the audio

output to the previous level.

Mode

Press the MODE button (3) to select a different mode of operation, as indicated on the display

panel. Available modes include the following: Tuner (AM/FM) > SXM (SiriusXM) > iPod/USB >

Auxiliary > BT Audio. Tuner is the default source when a prior source is no longer available.

NOTE: iPod, USB or SiriusXM (SXM) mode will be skipped if the module is not installed.

NOTE: SiriusXM (SXM) mode will be skipped when the Region menu option is set to

“

EURO”.

Reset

The reset button should be activated for the following reasons:

 Initial installation of the unit when all wiring is completed

 Function buttons do not operate

 Error symbol on the display

Use a ball point pen or thin metal object to press the RESET button (11). This may be necessary

should the unit display an error code.

Audio Menu

Press the AUDIO/MENU button (12) to access the audio menu. You can navigate through the

audio menu items by pressing the AUDIO/MENU button repeatedly. Once the desired menu

item appears on the display, adjust that option by pressing the VOL +/- buttons (22, 20) within 5

seconds. The unit will automatically exit the audio menu after five seconds of inactivity. The

following menu items can be adjusted.

Bass Level

Use the VOL +/- buttons to adjust the Bass level range from “-6” to “+6”.

Treble Level

Use the VOL +/- buttons to adjust the Treble level range from “-6” to “+6”.

Balance

Adjusting Balance controls the relative level between the left and right speakers in each pair.

Use the VOL +/- buttons to adjust the Balance between the left and right speakers from “Left 12”

to “Right 12”.

Fader

Adjusting Fade controls the relative level between the front and rear speaker pairs. Use the VOL

+/- buttons to adjust the Fader between the rear and front speakers from “Rear 12” to“Front

12”.

Equalizer

Press the AUDIO/MENU button (12) to enter EQ selection. Then press the VOL +/- buttons to

choose one of the following pre-defined bass and treble curves: USER > FLAT > POP >

CLASSICAL > ROCK.