Operation Manual

SETTING THE TIME MANUALLY

1. To set the hour, press and hold the MEMORY/SET button until the hour digits

flash.

2. While the hour digits are flashing, repeatedly press the or button to

adjust the correct hour.

3. Press the MEMORY/SET button to confirm the hour setting and the minute

digits will flash to prompt for adjusting.

4. While the minute digits are flashing, repeatedly press the or button

until the correct minute value is displayed.

5. Press the MEMORY/SET button again to complete the clock setting.

6. With the current time showing, press and hold the SNOOZE/SLEEP/DIMMER

button until “12H” appears and flashes on the display. Press the or

button to switch to 24 hour format.

NOTE:

a. While setting the PM time in 12H mode, make sure the PM indicator turns on.

b. Short press the SNOOZE/SLEEP/DIMMER button to adjust the LED display

brightness to high or low level accordingly.

Radio Operation

TUNING THE RADIO AND STORING THE PRESETS

1. Press the POWER/FUNCTION button on the unit to turn on the unit.

2. Press the POWER/FUNCTION button repeatedly to select the RADIO mode.

FM frequency will be displayed.

3. Press and hold either the or button to automatically search for a

station and stop when one radio station is found.

NOTE:

Press or button repeatedly to fine tune the station received during

auto tuning.

4. Press the MEMORY/SET button and or button to store the received

stations in order.

5. Press the MEMORY/SET button again to confirm the setting.

6. Repeat steps 3 - 5 to search and store the desired stations. Totally, 20 stations

can be stored in memory.

7. Press the CH MODE button and or button to select the stored station

you wish to listen. The LED display will show the frequency of the preset

station you selected. Then the unit will start playback.

8. Adjust the sound level by pressing the VOLUME +/AL1 or VOLUME -/AL2

buttons

NOTE:

a. Fully extend the FM antenna to get better reception.

b. If the received FM stations are in stereo mode, the unit will play in stereo mode

automatically. If reception is weak, press the MFB (Mono/Stereo) button to

turn the unit to mono mode.

Downloaded from www.Manualslib.com manuals search engine