Manualshelf

Operation Manual

ManualsBrandsSoundmaster ManualsAudioFUR100
123456789
FUR100 / English Instruction Manual
4
5. Press “SET” again, display shows n5 and flash. Press / button to set snooze duration
from n5 to n60 minutes.
6. Press “SET” once again, weather icons
flash. Press / button to set the weather
forecast condition according to the forecast
on TV or internet.
7. Press SET once again to return to normal
mode or it will return to normal mode in
around 10 seconds if no further press of any
other buttons.
ALARM
SET ALARM
1. Press and hold “AL 1.2/ON.OFF”, the A1 LED and the hour digits flashes. Press / to
set Alarm 1´ hours. Press and hold / to accelerate your setting.
2. Press “AL 1.2/ON.OFF” once again, the minutes digits flashes. Press / to set Alarm 1´
minutes. Press and hold / to accelerate your setting.
3. Press “AL 1.2/ON.OFF” once, the LED display shows “bu”. To select the sound sources of
your alarm press / :
bu = wake to buzzer
rd = wake to radio
4. Press “AL 1.2/ON.OFF” once. If “rd” (wake to radio) is selected, press / to select “HI” or
“LO” for the volume of radio you wake up to. This section does not apply for “bu” (wake to
buzzer).
5. Press “AL1.2/ON.OFF” once the A2 LED and the hour digits flash. Press / to set Alarm
2´hour. Repeat step 2 to 5 above to set alarm 2.
6. To store your alarm settings, press “SET” once (or if no button is pressed in around 10
seconds), your clock radio will return to normal time display mode.
When the related alarm is turned on, it will be indicated by the appearance of the A1 and / or
the A2 LED on the left side of the display.
TURN ON / OFF ALARM 1 AND 2
1. Press “AL 1.2/ON.OFF” once to activate Alarm 1, A1 LED appears.
2. Press “AL 1.2/ON.OFF” once again to activate Alarm 2, A2 LED appears.
3. Press once again to activate both Alarm 1 and 2. Both A1 and A2 LED’s appear.
4. Press once again to deactivate both alarms. Both A1 and A2 LED’s disappear.
STOP AND RESET THE ALARM TO COME ON THE NEXT DAY
When alarm 1 or 2 is sounding, the related A1 or A2 LED flashes. Press the “RADIO / SLEEP”
or “AL 1.2/ON.OFF” once to stop the alarm and reset it to come on the following day. After that
A1 and / or A2 LED remains on the display.
SUNNY
SUNNY AND CLOUDY
(PARTLY SUNNY)
CLOUDY
RAIN/SNOW