Operation Manual

UR102/ English instruction manual
POWER CONNECTION
Plug the AC power cord to a household outlet AC source. This unit is equipped with a battery back
up system, it requires a 3V CR2032 flat lithium battery (not included). Insert the battery in the
battery compartment, making certain that the positive and negative (+ and -) battery terminals are
attached to the corresponding terminals on the plate in the battery compartment. If an AC power
failure occurs, the clock automatically switches to the battery power supply, the clock and timer
memory continue running. When the AC power resumes, the clock switches back to AC again.
GETTING STARTED
1. TIME MANUAL SETTING
With the radio off mode, press and hold the SET.MEM / M+ button(9) ; “24 Hr” will blink. Press
the Tune +(8) or Tune –(4) button to set the unit to the 12 hour (12 Hr) mode or 24 Hour (24 Hr)
mode.
Press the SET.MEM / M + button (9) and the hours will blink.
Press the Tune+(8) or Tune – (4) to set the current hour, then press the SET.MEM / M +(9)
button again; the minute digits will blink. Press the Tune + (8)or Tune –(4) to set the current
minutes.
When done and you press SET.MEM / M + (9) button once again to indicate the current time is
set.
2. SETTING ALARM TIME
To preview the alarm time. Press the ALARM button (2/3) once.
While the display is showing the alarm time and you hold the ALARM button for 3 seconds
and the hours will blink.
Press the Tune +(8) or Tune -(4) to set the alarm hour.
Press the ALARM button again; the minute digits will blink. Press the Tune +(8) or Tune –(4) to
set the alarm minutes.
Press the ALARM button and you can change the sound mode (Buzzer, Radio) for the alarm.
Press Tune + (8) or Tune –(4) to choose different volume. The alarm volume will gradually
increase. Then press the ALARM button when done.
To delay the alarm, press SNOOZE. It will come on again in approx. 9 minutes. You may repeat
this cycle several times during the alarm cycle. To stop the alarm, press ALARM button .
To stop the alarm from coming on the following day, hold the ALARM button to turn it off. The
alarm icon will disappear to indicate the alarm is disarmed.