Operation Manual

UR102/ English instruction manual
Listening to Radio
Press the ON/OFF button (10) to turn the unit on.
Use the Tune + (8) or Tune – (4) button to select the desired FM station. If you press and hold the
Tune +(8) or Tune –(4) button for one second, the release, the unit will automatically scan to the
next broadcasting station.
Press the ON/OFF button (10) to turn the radio OFF.
To set / recall the radio presets
Press the ON/OFF button (10) to turn the unit ON.
Use the Tune +(8) or Tune –(4)button to select the desired FM station.
Press the SET.MEM/ M + button (9); “P02” will blink in the display.
Press the SET.MEM / M + button (9) again to set the preset.
Repeat steps 2 through 4 to set more presets.
The unit can preset 10 stations totally for FM.
When “P01-P10” is blinking, press the Tune+ (8)or Tune-(4)button to select the preset number.
When recalling preset stations, press SET.MEM / M + button(9) to select the preset number.
Sleep operation
When listening to radio, press Snooze / Sleep button (1) to enter sleep mode. You can just adjust
the sleep timer from 90 mins to 10 mins by pressing the Snooze / Sleep button (1). The unit will
automatically turn off after the selected time.
SPECIFICATIONS
Frequency range : FM 87.5 – 108 MHz
Battery backup : 3V (CR2032 Flat Lithium battery x 1) not included
Power supply : AC230V 50Hz
Note :
- Ensure that the FM antenna is completely unrolled and extended for best FM reception.