Operation Manual

NAP timer function (count down timer)
During radio off mode, press MEMORY.SET / MEMORY+ / NAP button (4) to turn on
NAP mode, the NAP time will keep by 5 seconds, within 5 seconds and press
MEMORY.SET / MEMORY+ / NAP button (4) button can change the duration from 90
min – 10 min.
The alarm buzzer will sound for 30 min and then shut off automatically. To stop the
alarm buzzer, press the ON/OFF button (11).
Press the MEMORY.SET / MEMORY+ / NAP button (4) has no effect during alarm
operation. Press ON/OFF button (11) to cancel NAP function.
Remark :
When using the NAP alarm did not the wake up light function
PROJECTION UNIT
- Focus setting : Adjust the projection clock brightness/focus by turning the
brightness/focus adjustment wheel unit the projected time is clearly shown on the
ceiling or wall.
- Adjust projected direction.
- To flip projected image by 180°, press 180° flip button (16).
- Converted the projection time or temperature, press keep depress over 2 seconds
to enter PROJECTION TIME 180° FLIP/TIME-TEMPERATURE button (16).
NOTE : PROJECTS TIME IMAGE ON THE CEILING OR WALL OF A DARKENED
ROOM.
MAXIMUN PROJECTION DISTANCE IS 3-9 FEET.
- SPECIFICATIONS
- Frequency range : 87.5 – 108 MHz
- Battery backup : 3V (CR2032 Flat Lithium battery x 1) not included
- Power supply : AC230V 50Hz
- Temperature range for Indoor : 0 to + 50°C or 32 to 122 °F
Select DST (daylight saving time) mode
For countries with daylight saving time (DST).the clock radio offers you DST option to
adjust summer time.
In standby mode press and hold >> / TUNE + / DST button (12) for 2 seconds. The
clock advances by one hour.
To exit DST mode, repeat the above operation.