Operation Manual

1
COMPACT DISC DUAL ALARM AM/FM DIGITAL CLOCK RADIO WITH PROJECTION
POWER SUPPLY
Connect the AC Cord to AC230V ~ 50 Hz wall outlet.
INSERTING THE BATTERY
Install one alkaline ‘9 volt’ battery (not included) in the battery compartment. The clock and
alarm memory will be retained during a power interruption. During battery backup operation,
the display will not light up, but the correct time will be maintained internally.
NOTE :
When placing your clock radio on a lacquered or natural finish, protect your furniture with a
cloth or other protective material.
SETTING THE TIME
Press and hold the CLOCK ADJ button, to select 12H or 24H format, then press the
SKIP/SEARCH HOUR (2) button to set hour and the SKIP/SEARCH MIN (3) button to
set the minutes. Press the CLOCK ADJ button to confirm setting.
LISTENING TO THE RADIO
1. Press the POWER ON/OFF/ALARM OFF button to turn on the unit.
2. Set the AM/FM/CD/BUZZ switch to the AM or FM position.
3. Use the TUNING control to select the desired station.
4. Adjust the VOLUME to your preference.
IMPROVING RADIO RECEPTION
FM : Extend the FM antenna wire for better FM reception.
AM : The built-in AM antenna is directional. Rotate the clock radio for the best AM reception.
LISTENTING TO A CD
Loading CD
1. Set the AM/FM/CD/BUZZ switch to the CD position.
2. Open the CD door and load the CD onto the pivot. Close the door.

Summary of content (7 pages)