User's Manual

12
4.2 STATION HEIGHT
Calculate the station height by measuring a
point with known height.
Elevation: Input the elevation of known point,
user can selected it from internal memory.
VD: The current vertical angle.
Calc.Ht: The measured height of station.
Stn Ht: The current height of station.
[Meas.]: Measure the distance
[Setting]: Set the result as station height.
4.3 BACKSIGHT CHECK
Check whether the current angle coincide with
the backsight.
Stn Pt: The ID of station point.
BS Pt: The ID of backsight point. It will be blank if
the backsight angle was input by manually.
BS: The backsight angle.
HA: the current horizontal angle.
dHA: The difference between BS and HA.
[RESET]: Reset the current angle as the backsight.