Manualshelf

User's Manual

ManualsBrandsSOUTH ManualsElectronicsTotal station
61626364656667686970
62
12.9 COINCIDENCE BETWEEN SIGHT OF VIEW AND EMITTING AXIS
Inspection
1. Set the reflector 50m away from the instrument.
Aim at the center of prism precisely.
2. Activate the laser pointer. Check whether the
center of reticle coincides to the laser pointer. If
no, please adjust the emitting axis.
Adjustment
If there is a huge deviation between the sight of
view and emitting axis, please send the
instrument to authorized service center for
maintenance.
12.10 LEVELING SCREWS ON TRIBRACH
If any of the leveling screws becomes loose, tighten the adjusting screws on the side of leveling screw
appropriately.