Instructions / Assembly

Page | 7
Figure 5
Insert Left Vertical Panel (F), Middle
Vertical Panel (G) and Right Vertical
Panel (H) into the grooves of Fixed Shelf
Panel (C) as shown.
Note: Make sure the holes for the
Cam Locks are facing down on Panel
(C) as shown. The finished edges on
each panel should be facing the
direction.
Figure 6
Screw with fingers to help align cam
bolts before using screwdriver.
Insert Cam Locks (2) into corresponding
holes on assembled unit from Figure 5
Screw Cam Bolts (1) and insert Wood
Dowels (3) into corresponding holes on
Left Side Panel (D) and Right Side
Panel (E).
Attach Left Side Panel (D) and Right
Side Panel (E) to assembled unit by
inserting Wood Dowels (3) and Cam
Bolts (1) into corresponding holes until
Left Side Panel (D) Right Side Panel (E)
and the assembled unit from Figure 3
meet.
Tighten by rotating Cam Locks (2)
clockwise with Phillips screwdriver.