Instructions / Assembly

PAGE 12
InstallatIon and applIcatIon GuIde For 600v conductors
Single Conductors:
T
c
pounds
 
 
T
c
pounds
T
c
pounds
Multiple Conductors (three or less conductors):
T
total
T
c
pounds
 
 
T
total
pounds
T
total
pounds
Multiple Conductors (more than three conductors):
T
total
T
c
pounds
 
 
T
c
pounds
T
c
pounds
T
total
pounds
T
total
pounds
CAUTION:
Pulling different conductor sizes at the same time is not recommended if the conductor size or other
characteristics are significantly different. If you must pull different size conductors, it must be done
with care. For example, if a run requires three 350 kcmil and three 8 AWG single conductors, it would
be preferable, though not necessarily ideal, to pull the three 350 kcmil single conductors and one 3
conductor 8 AWG cable at the same time. Pulling additional conductors into an existing conduit system
is generally not recommended. If this must be done, extreme caution must be taken. Of special concern
is the cutting action of the tensioned pulling rope.