Instructions / Assembly

PAGE 20
InstallatIon and applIcatIon GuIde For 600v conductors
PREPARING CONDUCTORS FOR INSTALLATION
Package Inspection – 



b. Shipping damage
c. Special instructions



Reel Setup – The cable reels should be setup to payoff in line if possible to facilitate and uniform
conductor bundle entering the conduit. The reels should be supported by properly maintained

the pull, and for this reason it is important to limit the cable tension as it enters the conduit.
The cable should feed straight into the conduit by hand or, for larger conductors, over a large
diameter sheave. The reel payoff should be assisted by hand or cable feeder to limit incoming
pull
®


Pull Rope –


®




The pulling rope should be attached by a means that is suitable for the expected
pulling tensions.
Low Tension Devices –

be exceeded.


means to pull cable as they have unproven tensile capabilities.
High Tension Devices –

published tensile rating for the device be exceeded.