Product Brochure

Conductor
Size/Const. AWG or
kcmil
Phase
Conductor
& Neutral
Equipment
Ground
Conductor
60°C 75°C 90°C Dwelling
8-8-8 7 -- 586 40 50 55 -- 231 B
6-6-6 7 -- 669 55 65 75 -- 338 B
4-4-4 7 -- 764 70 85 95 100 498 B
3-3-3 7 -- 829 85 100 110 110 611 B
2-2-2 7 -- 896 95 115 130 125 752 B
1-1-1 19 -- 1021 110 130 150 150 948 C
1/0-1/0-1/0 19 -- 1114 125 150 170 175 1169 C
2/0-2/0-2/0 19 -- 1209 145 175 195 200 1444 C
3/0-3/0-3/0 19 -- 1317 165 200 225 225 1792 C
4/0-4/0-4/0 19 -- 1438 195 230 260 250 2226 C
8-8-8-8 7 7 645 40 50 55 -- 286 B
6-6-6-6 7 7 738 55 65 75 -- 424 B
4-4-4-6 7 7 844 70 85 95 100 585 B
3-3-3-5 7 7 910 85 100 110 110 719 B
2-2-2-4 7 7 984 95 115 130 125 887 B
1-1-1-3 19 7 1132 110 130 150 150 1117 C
1/0-1/0-1/0-2 19 19 1235 125 150 170 175 1382 C
2/0-2/0-2/0-1 19 19 1342 145 175 195 200 1713 C
3/0-3/0-3/0-1/0 19 19 1462 165 200 225 225 2129 C
4/0-4/0-4/0-2/0 19 19 1598 195 230 260 250 2650 C
SER Two Conductor With Bare Contentric Ground (Formerly referred to as "Three Conductor")
Table values reflect XHHW-2 conductors
Allowable ampacities shown are for general use as specified by the National Electrical Code, 2011 Edition,
section 310.15 and 240.4(D).
Unless the is marked for use at higher temperatures the conductor ampacities shall be limited to the following
per NEC 110.14(C)
60 ° C When terminated to equipment for circuits rated 100 amperes or less or marked for 14 - 1 AWG
conductors.
75 ° C When terminated to equipment for circuits rated over 100 amperes or marked for conductors larger
than 1 AWG.
90 ° C XHHW wet or Dry locations for ampacity adjustment purposes using NEC section 310.15
For dwelling ampacity use section 310.15(B)(7)
Package Code:
A-250'
B-500'
C-1,000'
D-100'
E- 150'
SER Three Conductor With Bare Ground (Formerly referred to as "Four Conductor")
Stranding
Nominal
O.D. (Mils)
Allowable Ampacities
Approximat
e Net
Weight Per
1000' (Lbs)
Standard Package