Product Brochure
14 AWG through 2 AWG THHN/THWN Insulated Singles. Green Insulated Ground. UL Listed. 600 Volts. Rated VW-1.
Lightweight Aluminum Interlocked Armor.
Southwire Armorlite
®
Type MC Cable is suitable for use as follows:
•
Branch, feeder and service power distribution in commercial, industrial, institutional, and multi-
residential buildings.
•
Fished or embedded in plaster.
•
Concealed or exposed installations.
•
Environmental air-handling spaces per NEC 300.22 (C).
•
Places of Assembly per NEC 518.4 and theaters per NEC 520.5.
•
Installation in cable tray and approved raceways.
•
Under raised floors for information technology equipment conductors and cables per NEC 645.5(D) &
645.5(D)(2).
•
Class I Div. 2, Class II Div 2, & Class III Div. 1 Hazardous Locations.
Southwire Armorlite
®
Type MC Cable meets or exceeds the requirements of the following:
•
UL 83
•
UL 1569
•
UL 1685
•
UL Online Product Guide Info - Metal-Clad Cable (PJAZ) ( www.ul.com )
•
Federal Specification A-A59544 (formerly J-C-30B)
•
FT4/IEEE 1202 (70,000 Btu/hr) Vertical Cable Tray Flame Test
•
NFPA 70 (National Electrical Code), Article 330
•
Listed for use in UL 1, 2 and 3 Hour Through Penetration Firestop Systems
•
REACH/RoHS-2 (Chemical Limit) Compliant
Southwire Armorlite
®
Type MC Cable is constructed with soft-drawn copper, Type THHN/THWN conductors
rated 90°C dry available in sizes 14 AWG through 2 AWG, and a green insulated grounding conductor. The
conductors are cabled together and a binder tape bearing the print legend is wrapped around the assembly.
Aluminum interlocking armor is applied over the assembly.
Armorlite
®
Type MC
APPLICATIONS
STANDARDS & REFERENCES
CONSTRUCTION