Quick Start Guide Davicom USB2.
SOYO™ 1. AGP card with 3.3V is not supported, only AGP card with 1.5V can be used in this mainboard. 2. Please read the user guide before proceeding your installations. Serious damage may occur if the procedure is not followed properly. 3. If you have any problem getting your system to work, please follow the trouble shooting tips on page 25 of your user guide. 4. For immediate Technical questions, please visit www.soyousa.com/support, www.soyousa.com/kb. 5.
SOYO™ SY-P4I845PE Lite Motherboard mPGA Socket 478 processors Intel 845PE AGP/PCI Motherboard 533/400 MHz Front Side Bus supported ATX Form Factor Copyright © 2003 by SOYO Computer Inc. Trademarks: SOYO is a registered trademark of SOYO Computer Inc. All trademarks are properties of their owners. Product Rights: All names of the product and corporate mentioned in this publication are used for identification purposes only. The registered trademarks and copyrights belong to their respective companies.
Introduction SY-P4I845PE Lite Quick Start Guide 1 Introduction Congratulations on your purchase of the SY-P4I845PE Lite Motherboard. This Quick Start Guide illustrates the steps for installing and setting up your new Motherboard. This guide provides all users with the basic steps of Motherboard setting and operation. For further information, please refer to the SY-P4I845PE Lite Motherboard User's Manual that came with your Motherboard.
Introduction SY-P4I845PE Lite Quick Start Guide SY-P4I845PE Lite Motherboard Layout PS/2 KB PS/2 Mouse Connector Connector COM A +12V Power COM B ATX Power PRT USB 1_2 LAN Connector AOUT AIN J30 1 AMIC 2 AGAME 5 6 FJ1 PCI Slot #1 AC97 Audio JP5 CMOS Clear Jumper 3 PCI Slot #2 PCI Slot #3 CDIN1 1 4 IDE 2 DDR1 DDR2 DDR3 AGP Slot LAN DAVICOM DM9102AE IDE 1 AUXIN1 1 4 PCI Slot #4 PCI Slot #5 ITE IT8712F-A PCI Slot #6 13 14 USB20_1 SMCARDCN 1 2 FLP 3V Lithium Battery SIRCON 5
Introduction SY-P4I845PE Lite Quick Start Guide Key Features Supports Intel® mPGA Socket 478 processors - Pentium® 4 Supports multiple-boot function Supports 533/400 MHz Front Side Bus Frequency AGP 2.0 Compliant; AGP Connector supports: - 1.
SY-P4I845PE Lite Quick Start Guide 2 Installation Before handling the Motherboard, ground yourself by touching on to an unpainted portion of the system's metal chassis. Remove the Motherboard from its anti-static packaging. Hold the motherboard by the edges and avoid touching its components. Check the Motherboard for damage. If any chip appears to be loose, press carefully to seat it firmly in its socket.
SY-P4I845PE Lite Quick Start Guide Install the Motherboard We will now begin the installation process. Please follow the systematic procedure designed to lead you to a complete and correct installation. Hardware Installation Step 1- Install the Central Processing Unit (CPU) Step 2- Install memory modules Step 3- Connect cables, case wires, and power supply Install expansion cards Step 4- Install expansion cards Step 1.
SY-P4I845PE Lite Quick Start Guide FJ1 jumper (beside the AGP slot) CPU FSB 100MHz FSB Auto Detect FSB (Default) 133MHz FSB 3 2 1 3 2 1 FJ1 Jumper 3 2 1 Step 2. Configure Memory This motherboard support PC2100 and PC2700, non-ECC and non-registered module. The largest memory capacity possible is 2GB. On this motherboard, DRAM speed can be set independent from the CPU front side bus speed. A maximum of 2 pcs. Double-sided module can be used at the same time.
SY-P4I845PE Lite Quick Start Guide FJ1 Table: Hardware Installation FJ1 1-2 (default) 2-3 Open Available multiplier in the “DRAM:CPU multiplier” option Auto detect 1.33 1.00 / 1.25 / by SPD Your memory frequency is dependent on your CPU front side bus frequency. It is calculated by: Memory frequency.
SY-P4I845PE Lite Quick Start Guide Connectors and Plug-ins CPU Cooling Fan: CPUFAN1 Pin1 Pin2 Pin3 CPU Cooling Fan: CPUFAN2 Pin1 Pin2 Pin3 GND GND Sensor +12V Sensor Chassis Fan: CHAFAN1 Pin1 Pin2 Pin3 GND +12V Sensor Chassis Fan: CHAFAN2 Pin1 Pin2 Pin3 GND +12V NC CD-IN 1 AUXIN1 Pin1 Pin2 Pin3 Pin4 Pin1 Pin2 Pin3 Pin4 Left GND GND Right Left GND GND Right Standard IrDA (Infrared Device Header): SIRCON Pin1 Pin2 Pin3 Pin4 Pin5 VCC None IRRX GND IRTX MIC & LED Connector: J30 Pin1
Hardware Installation SY-P4I845PE Lite Quick Start Guide Power On/Off: PWRBT Connect your power switch to this header (momentary switch type). To turn off the system, press this switch and hold down for longer than 4 seconds. ATX 12V Power Supply: ATX PW Attach the ATX 12V Power cable to three connector. (This motherboard requires an ATX 12V power supply, an AT and ATX power supply can NOT be used.
SY-P4I845PE Lite Quick Start Guide Install expansion cards The motherboard has 1 AGP slot and 6 PCI slots. 1. Read the instruction document of the related expansion card before inserting the expansion card into the computer. 2. Press the expansion card firmly into expansion slot in motherboard. 3. Be sure the metal contacts on the card is seated in the slot. 4. Replace the screw to secure the slot bracket of the expansion card. 5. Install related driver from the operating system.
SY-P4I845PE Lite Quick Start Guide CMOS Clear (JP5) In some cases the CMOS memory may contain wrong data, follow the steps below to clear the CMOS memory. Hardware Installation 1. Clear the CMOS memory by momentarily shorting pin 2-3 on jumper JP5. This jumper can be easily identified by its white colored cap. 2. Then put the jumper back to 1-2 to allow writing of new data into the CMOS memory.
SY-P4I845PE Lite Quick Start Guide Audio Speakers connections When using 2 channel speaker, connect the speaker cable to line-out. If you’re using 4 channel speaker, connect the front L/R speakers to line-out and rear system. Don’t forget to set the Audio Rack software to 4 channel system. Line-out Line-in Onboard LAN LED Definition When this LED is lit, this means the LAN is running at 100 mbps, if it is not lit, the Onboard LAN is working at 10 mbps. This is the LAN activity LED.
SY-P4I845PE Lite Quick Start Guide 3 Quick BIOS Setup This Motherboard does not use any hardware jumpers to set the CPU frequency. Instead, CPU settings are software configurable with the BIOS [SOYO COMBO FEATURE]. The [SOYO COMBO FEATURE] combines the main parameters that you need to configure, all in one menu, for a quick setup in BIOS.
SY-P4I845PE Lite Quick Start Guide 4 The SOYO CD The SOYO-CD will Auto Run only in Windows Base Operating System. Your SY-P4I845PE Lite motherboard comes with a CD-ROM labeled “SOYO CD”. The SOYO CD contains a. The user’s manual for your new motherboard in PDF format, b. The drivers software available for installation, and c. A database in HTML format with information on SOYO motherboards and other products. Step 1.
The SOYO CD SY-P4I845PE Lite Quick Start Guide The user's manual files included on the SOYO CD are in PDF (Postscript Document Format). In order to read a PDF file, the appropriate Acrobat Reader software must be installed in your system. Note: The Start Up program automatically detects if the Acrobat Reader utility is already present in your system, and otherwise prompts you on whether or not you want to install it. You must install the Acrobat Reader utility to be able to read the user's manual file.
SY-P4I845PE Lite Quick Start Guide driver revision: Intel Chipset Software Installation Utility for Win 98/98SE/ME/2000/XP Intel Application Accelerator for Win 98/98SE/ME/NT/2000/XP Intel USB2.0 Driver for Win 98/ME Intel USB2.
SY-P4I845PE Lite Quick Start Guide Davicom Onboard Lan Driver for Win 9x/ME/NT/2000/XP This Setup program will install the Driver for Davicom Onboard Lan. P4I845PE Lite ITE hardware doctor for Win 9x/ME/2000/NT/XP Your motherboard comes with a hardware monitoring IC. By installing this utility Temperature, Fan speed and Voltages can be monitored. ITE SIM card reader Driver/Utility for Win 9X/ME/NT/2K/XP Driver to support the smart card reader. You need to install this if you use the SCR.
SY-P4I845PE Lite Quick Start Guide The SOYO CD After Windows XP installation, your device manager should look like this: 21
SY-P4I845PE Lite Quick Start Guide The SOYO CD After driver installation, your Windows XP device manager should look like this: Note: To install the USB 2.
SY-P4I845PE Lite Quick Start Guide The SOYO CD Drivers directory list in the CD driver 23
SY-P4I845PE Lite Quick Start Guide 5 USB2.0 Driver Installation For Windows 2000 and Windows XP USB 2.0 Drivers are available for download using Windows Update for both Windows XP and Windows 2000. USB2.0 Driver Installation For additional information regarding USB 2.0 support in Windows XP and Windows 2000, please visit http://www.microsoft.com/hwdev/bus/USB/default.
SY-P4I845PE Lite Quick Start Guide Quick Trouble shoot tips Boot-up Issues The system do not power-up, no beeping sound heard and the CPU fan does not turn on. 1. 2. 3. 4. 5. Check if the power cord is plug to the power source. Check if the power is connected to the M/B. Check if the cable of the case power button is connected to the M/B power button connector (see connectors and plug-ins in the manual for more info). Make sure the power supply is not defective. Change the power supply.
SY-P4I845PE Lite Quick Start Guide 2. 3. 4. 5. The CPU might be overheating. Check the CPU FAN if it is defective or see if the CPU fan is in contact with the CPU. Clear CMOS battery. (JP5 connector, see Quick start guide for more info on how to clear the CMOS). Make sure the power supply you have on your system support the M/B specification. Example. If you have a P4 M/B, you need to use a P4 power supply.
SY-P4I845PE Lite Quick Start Guide My system intermittently locks up, during Windows installation. 1. 2. 3. Go to BIOS and load “load optimized default”. Check website for any BIOS update. If still has the problem, remove all other add-on cards except CPU/ Memory/ Video card/Hard disk. See if you can finish Windows installation. Then put peripherals in one by one to identify which one cause the lockup.
SY-P4I845PE Lite Quick Start Guide I’m using a 400MHz FSB CPU, I cannot find the DDR 166MHz option in the BIOS, why? The CPU used should be 133MHz FSB to have PC2700 support. VGA Issue I cannot set my VGA to go higher than 16 color (640x 480). 1. 2. Make sure that you have installed the Intel Inf driver. Install/ re-install the VGA driver. After wake-up from Suspend to RAM or Standby mode, the screen has no display but I can hear the hard disk operating 1.
SY-P4I845PE Lite Quick Start Guide Add PCI Audio Card do not work on this motherboard. 1. 2. Go to SOYO COMBO Setup and Disable “onboard audio”. Go to integrated peripherals and Disable “Game port address” and “Midi port address” Hard disk/FDD/ CD-ROM issue My Western digital HDD is not detected during boot-up Change the jumper settings to cable select or single. Sometimes the system finds my CD-ROM, sometimes not 1. 2. Check CD-ROM if it is working properly.
SY-P4I845PE Lite Quick Start Guide How to contact us: If you are interested in our products, please contact the SOYO sales department in the region you live. If you require Technical Assistance, please contact our Technical Support in the region you live. SOYO prefers Email as communication medium, remember to always add to the email the country that you live in. TAIWAN Hong Kong SOYO COMPUTER INC. SOYO ASIA LTD. No. 21 Wu-Kung 5 Rd., Hsin Chuang City, Taipei Hsien, Taiwan, R.O.
Edition : February 2003 Version 1.