Manualshelf

User's Manual

ManualsBrandsSpark ManualsModemsSpark Spark Modem NIC Series
12345678910
WWW.SparkLAN.com
User’s Guide
6
3.1. Installation Overview
Here are some steps you will perform in establishing your wireless network connection:
Install the Access Point at first. AP is needed in case of Infrastructure network mode.
Install the software using the Install CD.
Install the Wireless LAN Card (WIRELESS LAN 802.11g Adapter).
Install the network protocol(s) required to communicate on your network. Most likely you will need
the TCP/IP protocol.