SparkFun BabyBuck Regulator Breakout - 3.3V (AP63203) - Datasheet

AP63200/AP63201/AP63203/AP63205
Absolute Maximum Ratings (Note 4) (@T
A
= +25°C, unless otherwise specified.)
Symbol
Parameter
Rating
Unit
V
IN
Supply Voltage
-0.3 to +35.0 (DC) V
-0.3 to +40.0 (400ms) V
V
SW
Switch Node Voltage
-1.0 to V
IN
+ 0.3
V
V
BST
Bootstrap Voltage
V
SW
- 0.3 to V
SW
+ 6.0
V
V
FB
Feedback Voltage
-0.3V to +6.0
V
V
EN
Enable/UVLO Voltage
-0.3V to +35.0
V
T
ST
Storage Temperature -65 to +150 °C
T
J
Junction Temperature +160 °C
T
L
Lead Temperature
+260
°C
ESD Susceptibility (Note 5)
HBM
Human Body Mode
2000
V
CDM
Charge Device Model
1000
V
Notes: 4. Stresses greater than the 'Absolute Maximum Ratings' specified above may cause permanent damage to the device. These are stress ratings only;
functional operation of the device at these or any other conditions exceeding those indicated in this specification is not implied. Device reliability may
be affected by exposure to absolute maximum rating conditions for extended periods of time.
5. Semiconductor devices are ESD sensitive and may be damaged by exposure to ESD events. Suitable ESD precautions should be taken when
handling and transporting these devices.
Thermal Resistance (Note 6)
Symbol
Parameter
Rating
Unit
θ
JA
Junction to Ambient TSOT26 89 °C/W
θ
JC
Junction to Case TSOT26 39 °C/W
Note: 6. Test condition for TSOT26: Device mounted on FR-4 substrate, single-layer PC board, 2oz copper, with minimum recommended pad layout.
Recommended Operating Conditions (Note 7) (@T
A
= +25°C, unless otherwise specified.)
Symbol
Parameter
Min
Max
Unit
V
IN
Supply Voltage
3.8
32 V
T
A
Operating Ambient Temperature Range
-40
+85
°C
Note: 7. The device function is not guaranteed outside of the recommended operating conditions.
AP63200/AP63201/AP63203/AP63205
Document number: DS41326 Rev. 2 - 2
4 of 18
www.diodes.com
January 2019
© Diodes Incorporated