INSTRUCTION MANUAL 4MP Flexible Intensifier Technology TVI Motorized Zoom Focus Camera HFB4M (Bullet Camera) HFD4M (Dome Camera) Speco Technologies is constantly developing product improvements. We reserve the right to modify product design and specifications without notice and without incurring any obligation. Speco(Fit).indd 1 Rev.
Contents ◑ Contents....................................................... 2 ◑ Precautions.................................................. 3, 4 ◑ Safety Instructions....................................... 5 ◑ Package Contents........................................ 6 ◑ Camera Installation...................................... 7-10 ◑ Specifications............................................... 11,12 ◑ Camera Dimension...................................... 13 ◑ Features....................................
Precautions Do not install the camera in extreme temperature conditions. Only use the camera under conditions where temperatures are between -10°C and +50°C. Be especially careful to provide ventilation when operating under high temperatures. Never keep the camera pointed directly at strong light. It can cause malfunctions to occur. Do not install the camera under unstable lighting conditions. Severe lighting change or flicker can cause the camera to work improperly.
CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION:TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE COVER(OR BACK). NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. ISO14001 The lightning flash with an arrowhead symbol, within an equilateral triangle is intended to alert the user to the presence of uninsulated dangerous voltage within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons.
Safety Instructions Precautions for use ◑ This camera should be installed by qualified personnel only ◑ There are no user serviceable parts inside ◑ Do not disassemble this camera other than to make initial adjustments ◑ Use a UL approved regulated 24 volt AC or 12 volt DC power supply ◑ Use appropriate low voltage power cable to prevent fire or electrical shock ◑ Please insure that your installation area can support the weight of the camera Please handle this camera carefully : ◑ Do not use a strong
Package Contents Please make sure that the following items are included in the Package: 1) HFB4M Included Junction Box • 1 Power Jack • 1 Mount Base Sticker • 1 Wrench • Set Screw - 3 Tapping Screws 4x25 - 4 Hexagon Socket Screws M4x14 - 3 Plastic Anchor 2) HFD4M Included Junction Box • 1 Power Jack • 1 Chameleon Cover • 1 Junction Box Sponge • 1 Wrench • Set Screw - 4 Tapping Screws 4x25 - 3 MachineScrews M4x15 - 4 Plastic Anchor -6- Speco(Fit).
CAMERA INSTALLATION Camera Installation CONNECT POWER CABLE 1. WHEN USING 12 VOLTS DC (constant voltage 500mA) P o w e r In p u t :R E D C e n te r : (+) D C 12V P owe r S upply 2. WHEN USING 24 VOLTS AC (40 Volt Amps) R E D (+) A C 24V B L A C K :(-) P owe r S upply 3. CONNECT VIDEO CABLE CONNECT BLACK COLOR BNC CABLE TO THE BNC JACK. -7- 6 Speco(Fit).
Camera Installation Compatibility 1) HFB4M INTCM 2) HFD4M INTWM INTCM -8- Speco(Fit).
Camera Installation 1. HFB4M WALL ANCHOR, WHT, 6X30, PLASTIC, 4EA JUNCTION BOX SCREW-TAP, SLV, SUS, BH_4X25, TP1, 3EA SCREW-MS, WHT, SUS, PH_M4X10, 3EA SCREW-MS, WHT, SUS, PH_M4X14, 4EA -9- Speco(Fit).
Camera Installation 2. HFD4M - 10 - Speco(Fit).
4MP FIT TVI Motorized Zoom Focus Camera 2.8-12mm MFZ Lens ■ HFB4M (2.8-12mm) 1/2.8” 0.01Lux F SPECIFICATIONS MODEL Image sensor Sensor type Effective pixels Total pixels Resolution Framelate Scanning system Min.
4MP FIT TVI Motorized Zoom Focus Camera 2.8-12mm MFZ Lens ■ HFD4M (2.8-12mm) 1/2.8” 0.01Lux F SPECIFICATIONS MODEL Image sensor Sensor type Effective pixels Total pixels Resolution Framelate Scanning system Min.
Camera Dimension 1) HFB4M 9” 3.4” 3.74” 9” 4.76” 4.76” 3.4” 3.74” 3.85” 2) HFD4M 4.76” 4.76” 3.85” 3.14” 3.14” - 13 - Speco(Fit).
General Features ● Transfer Video Interface The combination of a 5Mega CMOS image sensor and TVI DSP provides an excellent resolution of TVI picture. ● DNR Smart DNR prevents the image blurring of moving object and activates only if moving objects are appearing on the scene. ● Smart-IR No saturation image, vivid image in darkness! "TVI" camera makes very sharp video image in darkness! This technology eliminates saturation of video image of the closer object in darkness by control of the IR sensitivity.
How to Set Up the camera menu ● Setup Menu MENU LENS SENS-UP BACKLIGHT DNR 1.PRESET 2.
How to Set Up the camera menu ● Setup Menu MENU AUTO D>N THRES(AGC) 0~20 default : 13 N>D THRES(AGC) 0~20 default : 3 DELAY LOW, MIDDLE, HIGH RETURN (SAVE/CANCEL) COLOR B&W 4.DAY&NIGHT 5.WHITE BAL 6.SPECO DNR 7.
How to Set Up the camera menu ● Setup Menu MENU POS3-Y default : 13 Y LEVEL 0~20 default : 10 CB LEVEL 0~20 default : 10 CR LEVEL 0~20 default : 10 TRANS 0~3 default : 2 RETURN (SAVE/CANCEL) 8.SYSTEM 9.EXIT OFF RETURN (SAVE/CANCEL) OUTPUT TVI FRAME RATE 720/30P, 1080/30P, 1440/30P, 1944/20P, 1944/12.
Menu Set Up Menu items can be selected by using the OSD buttons of the camera. 1. PRESET SPECO TECH 1. PRESET INDOOR 2.MAIN SETUP 3.EXIT 1-1. Preset : INDOOR / OUTDOOR / LOW LIGHT / HALLWAY / LOBBY(WDR) / ELEVATOR. - Used for a quick and easy setup for the installation environment. * The Advaned Set Up menu will be displayed on the monitor. 2. Move and select the required function using the Up and Down button.
NOTE * Move to the available submenu by moving arrow to desired feature. * Submenu is not available when this symbol displayed “---“. 1. 2-MOTORIZED 1. Move the triangular indicator to 2-MOTORIZED using the Up and Down buttons on the Set Up menu screen. 2. Select the desired lens type by pressing the Left of Right button. MENU 1. 2-MOTORIZED 2. EXPOSURE 3. BACKLIGHT 4. DAY&NIGHT 5. WHITE BAL 6. SPECO DNR 7. IMAGE 8. SYSTEM 9. EXIT OFF INTENSIFIER AUTO MIDDLE 1.
2. EXPOSURE 1. On the Set Up menu, Select EXPOSURE by using the Up or Down button. MENU 1. 2-MOTORIZED 2. EXPOSURE 3. BACKLIGHT 4. DAY&NIGHT 5. WHITE BAL 6. SPECO DNR 7. IMAGE 8. SYSTEM 9. EXIT OFF INTENSIFIER AUTO MIDDLE 2. Select the desired shutter mode by pressing the Left or Right button. 2. EXPOSURE BRIGHTNESS SHUTTER SENS-UP AGC RETURN 10 IIIIIIIIIIIIIIIIIII| AUTO X8 10 IIIIIIIIIIIIIIIIIII| ◆ BRIGHTNESS : The brightness can be adjusted. The brightness control range is 1~20.
3. BACKLIGHT On this menu, backlight image can be compensated by users selecting one of modes. (HLC, BLC, WDR) 1. Move the triangular indicator to BACKLIGHT on the SETUP menu screen using the Up and Down button. 2. Select the desired mode by using the left or Right button. MENU 1. 2-MOTORIZED 2. EXPOSURE 3. BACKLIGHT 4. DAY&NIGHT 5. WHITE BAL 6. SPECO DNR 7. IMAGE 8. SYSTEM 9. EXIT OFF INTENSIFIER AUTO MIDDLE ◆ Off : Deactivated status.
BLC H-POS V-POS H-SIZE V-SIZE RETURN 11 10 3 3 ◆ WDR : The WDR (Wide Dynamic Range) function works to correct excessive light within the frame to produce a usable image. When the image has simultaneous bright and dark areas, it makes both areas distinct. If you select WDR, a submenu appears where you can make finer adjustments. WDR WDR MODE WEIGHT RETURN FRAME OFF - WDR MODE : The Specific WDR area can be selected.
4. DAY&NIGHT You can change the color mode of color or black / white by setting up the mode. 1. Select Day&Night using the Up or Down button on the Set Up menu screen. 2. Select the desired mode using the Left or Right buttons. MENU 1. 2-MOTORIZED 2. EXPOSURE 3. BACKLIGHT 4. DAY&NIGHT 5. WHITE BAL 6. SPECO DNR 7. IMAGE 8. SYSTEM 9.
5. WHITE BAL Use this function when the color adjustment of a screen is needed. 1. Move the triangular indicator to WHITE BAL on the SETUP menu screen using the Up and Down button. 2. Select the desired mode by using the left or Right button. MENU 1. 2-MOTORIZED 2. EXPOSURE 3. BACKLIGHT 4. DAY&NIGHT 5. WHITE BAL 6. SPECO DNR 7. IMAGE 8. SYSTEM 9. EXIT OFF INTENSIFIER AUTO MIDDLE ◆ AUT0 : Use this mode when the color temperature is from 3,000k to 8,000k.
6. SPECO DNR This function is used to improve the picture quality by filtering the noise which is generated under low brightness conditions. You can set different levels here. 1. Move the triangular indicator to SPECO DNR by useing the Up and Down button. 2. Select the mode to use by pressing the left or Right button and OFF/LOW/MIDDLE/HIGH level selectable. MENU 1. 2-MOTORIZED 2. EXPOSURE 3. BACKLIGHT 4. DAY&NIGHT 5. WHITE BAL 6. SPECO DNR 7. IMAGE 8. SYSTEM 9. EXIT OFF INTENSIFIER AUTO MIDDLE 7.
7. IMAGE SHARPNESS COLOR GAIN GAMMA MIRROR FLIP D-ZOOM ACE DEFOG SHADING PRIVACY RETURN 10 IIIIIIIIIIIIIIIIIII| 10 IIIIIIIIIIIIIIIIIII| 0.65 OFF OFF 1.0X OFF OFF OFF ◆ SHARPNESS [1 ~ 10] : Adjusts the image sharpness. If the level goes up excessively, it may affect the video image and generate a noise. ◆ COLOR GAIN [0 ~ 20] : Changes the color gain of the camera. ◆ GAMMA [0.45 ~ 0.65] : Changes the gamma curve of the camera. ◆ MIRROR [ON, OFF] : Mirrors the image horizontally on the screen.
* BOX ZONE NUM [0~15] : Select a mask out of the 16 mask areas and set the options below for the selected mask. ZONE DISP [ON, OFF] : Choose ON to activate privacy masks and press OFF to deactivate masks. H-POS [0~60] : Define the horizontal start position of the privacy mask. V-POS [0~34] : Define the vertical start position of the privacy mask. H-SIZE [0~60] : Define the horizontal size of the privacy mask. V-SIZE [0~34] : Define the vertical size of the privacy mask.
MENU 1. 2-MOTORIZED 2. EXPOSURE 3. BACKLIGHT 4. DAY&NIGHT 5. WHITE BAL 6. SPECO DNR 7. IMAGE 8. SYSTEM 9. EXIT OFF INTENSIFIER AUTO MIDDLE 8.SYSTEM VIDEO OUTPUT IMAGE RANGE LANGUAGE CAM TITLE RESET RETURN ◆ - FULL ENG OFF ON VIDEO OUTPUT OUTPUT : TVI. FRAME RATE[720/30P, 1080/30P, 1440/30P, 1944/20P, 1944/12.5P] : Choose output type. FREQ[60Hz/50Hz] : You can select PAL (25FPS) or NTSC (30FPS). CONFIRM : Apply the setting value of output mode.
Trouble Shooting PROBLEM Nothing appears on the screen. POSSIBLE CAUSE ☞Check the power cable, power supply output and video connection between the camera and monitor. The image on the screen is dim. ☞Are the camera lens or the lens glass dirty? Clean the lens / glass with a soft clean cloth. ☞Adjust the monitor controls, as required. ☞If the camera is facing a very strong light, change the camera position. ☞Adjust the lens focus. The image on the screen is dark.
- 30 - Speco(Fit).
Speco(Fit).
200 New Highway Amityville, NY 11701 631-957-8700 1 800 645 5516 www.specotech.com Speco(Fit).