Manual

TM 40/40R, Rev (4) November 2010
Performance Considerations 11
1.5.5 Output Signals
Outputs are available according to the default configuration or the wiring
options selected for the 40/40R detector. Determine the outputs for your
model according to Table 5.
The detector incorporates several types of output suitable to different
control systems:
• 0-20mA (stepped) with HART
• Relays (Alarm, Fault, Auxiliary)
• RS-485 Modbus
Table 5: Available Output Types
Output Type Version Detector Status
40/40R – Options 1XXXX,
4XXXX, 5XXXX
The relay is N.O.
Alarm relay
40/40R – Options 2XXXX,
3XXXX
The relay is N.O. and N.C.
Auxiliary relay
40/40R – Options 4XXXX
and 5XXXX
The relay is N.O.
40/40R – Options 1XXXX,
2XXXX, 4XXXX
The relay is N.C. energized
Fault relay
40/40R – Options 3XXXX,
5XXXX
The relay is N.O. energized
40/40R – Option 1XXXX
SINK Option, (can be
changed to Source – see
Figure 9, Figure 10 and
Figure 11)
0-20mA
current output
40/40R – Options 2XXXX
and 3XXXX
SOURCE Option with the
HART protocol
RS-485 All versions Modbus protocol