Owner manual

Micro800™ 4 Ch Universal Thermistor Input Module 10
Publication 0100198-01 Rev. A
Data Format
EU x1
This displays the measured readings in their natural integer form. Due to
the measurement range and 16-bit data size, the highest resolution that
can be displayed for resistance is 10 ohms. Temperatures will have two
decimal places of resolution.
For resistance, it will be in the range from 0 to 32767 which represents
resistance in ohms divided by ten (0 to 327.67 k ohms).
For temperature, it will display in the range from +32767 to -32768
(+327.67 degrees C to -327.68 degrees C). The displayed values are
clipped at the user-defined Maximum and Minimum parameters (defined
below).
EU x10
This display format is the same as EU x1 but divided by 10.
Raw Proportional
The Raw Proportional Data Format uses the Maximum and Minimum
user-defined values as its end points and scale relative to them. The
Maximum Range is represented by +32767 while the Minimum Range is
-32768 to give a full 16-bit span.
The output shall be scaled relative to those two user-defined values.
When Equation is set to Resistance, you enter appropriate resistance
values for the Maximum and Minimum parameters. For the other
Equation settings, you enter appropriate temperature values for the
Maximum and Minimum parameters.
Equation
BETA
If the Equation is set to BETA, the COEFF-A/BETA string contains the
BETA parameter. The COEFF-B/R@25C string contains the resistance
at 25˚ C.
COEFF-C string will be ignored.