Warranty

3
• Keep the work area clean and well lit. Cluttered and dark areas increase the risk of
electric shock, fire, and injury to persons.
• Do not operate the tool in explosive atmospheres, such as in the presence of flammable
liquids, gases, or dust. The tool is able to create sparks resulting in the ignition of the dust
or fumes.
• Keep bystanders, children, and visitors away while operating the tool. Distractions may
result in the loss of control of the tool.
• Stay alert. Watch what you are doing and use common sense when operating the tool.
Do not use the tool while tired or under the influence of drugs, medications, or alcohol.
• Dress properly. Do not wear loose clothing or jewelry. Contain long hair. Keep hair,
clothing, and gloves away from moving parts. Loose clothes, jewelry, or long hair
increases the risk of injury to persons as a result of being caught in moving parts.
• Avoid unintentional starting. Be sure the switch is off before connecting to the air supply.
Do not carry the tool with your finger on the switch or connect the tool to the air supply
with the switch on.
• Remove adjusting keys and wrenches before turning the tool on. A wrench or key that is
left attached to a rotating part of the tool increases the risk of personal injury.
• Do not overreach. Keep proper footing and balance at all times. Proper footing and
balance enables better control of the tool in unexpected situations.
• Use safety equipment. A dust mask, non-skid safety shoes and a hard hat must be used
for the applicable conditions.
• Always wear eye protection. Wear ANSI-approved safety goggles.
• Always wear hearing protection when using the tool. Prolonged exposure to high
intensity noise may result in hearing loss.
Important Operating Instructions
GENERAL SAFETY INSTRUCTIONS