Manual

25SPEKTRUM DX6 • TRANSMITTER INSTRUCTION MANUAL



The Serial Number screen displays the transmitter serial number and AirWare software version.

Reference the Serial Number screen any time you need to register your transmitter or update the AirWare software from the Spektrum

Community website.

The transmitter AirWare software version appears between PREV

and NEXT at the bottom of the Serial Number screen. Register

your DX6 to get AirWare software updates and other news at

spektrumrc.com

IMPORTANT: AirWare ﬁles are speciﬁc to the transmitter

serial number and you cannot transfer AirWare ﬁles between

transmitters, ie., downloading an AirWare software update once

and attempting to install it on multiple transmitters.

CALIBRATE

Calibrating the Transmitter

1. Carefully move the gimbal sticks in a + shape moving from left

to right, then up and down. Press gently on the gimbals at the

stops to achieve an accurate calibration. Return both gimbal

sticks to the center position.

2. Select SAVE to store the calibration.

Serial Number

Exporting the Serial Number to the SD Card

Youmayndithelpfultoexportthetransmitterserialnumbertoa

textleforyourpersonalrecordsorwhenyouareregisteringthe

transmitter on the Spektrum Community.

To export the transmitter serial number:

1. Insert an SD Card in the card slot on the transmitter.

2. Scroll to EXPORT and press the scroll wheel. The SD Status

screenappearsandshoulddisplayMY_DX6.xmlinthemiddle

of the screen.

3. Press the scroll wheel again to return to the Serial Number

screen.

4. Power off the transmitter and remove the SD Card from the

transmitter.

5. Install the SD Card in a card reader connected to your

computer.

6.OpentheMY_DX6.xmllefromtheSDCardlocation.You

can then copy and paste the serial number into your personal

records or to the Spektrum Community website.

SYSTEM SETUP



Locating the Transmitter AirWare Software Version



The Calibration screen stores the potentiometer endpoints for all proportional controls. It is mandatory to complete the calibration after

changing the stick mode selection.