Manual

26 SPEKTRUM DX6 • TRANSMITTER INSTRUCTION MANUAL
EN


SYSTEM SETUP
Import Model
This function overwrites all model memories. Ensure that the
models currently in your transmitter are saved on an SD card
separate from the transmitter before performing this function.
To import an individual model file from the SD Card:
1. Save the model file to the SD Card.
2. Select the Model List location where you wish to import the
new model file.
3.IntheSDCardmenu,scrolltoSelectOptionandpressthe
scroll wheel once.
4. Scroll to Import Model and press the scroll button again to
save the selection. The Select File screen appears.
5.Selectthemodelleyouwishtoimport.TheOverwritescreen
appears.
IMPORTANT: When you select Import, the transmitter leaves the
System Setup List.
6. Select the model that you would like to import the model to.
7. Select Import to confirm overwriting the current model file. The
transmitter activates the new model file and the Main Screen
appears.
A Preflight Checklist may appear prior to the Main Screen if the
checklistwasactiveduringthemodelleexport.SelectMAINto
exitthePreightChecklist.
See “Preflight Setup” for more information.
Import All Models
To import all models from the SD Card:
1. Select Import All Models.
2. Confirm by selecting IMPORT.
IMPORTANT: After importing a model, you must rebind the
transmitter and receiver. The Main Screen must show DSM2 or
DSMX in the upper left corner.
You can import a model to any location you want. If you prefer
to use Import All, you can use your PC to rename the SPM file.
The first two digits (01 to 50) are the destination model number.
Your SD card can only contain 50 models. Save files to folders on
the card then remove from the card all unused models. Files are
selected by their position in the directory table.
Export Model
YoucanusetheExportModeloptiontoexportasinglemodelle
to the SD Card.
1.MakesuretheactivemodelleistheoneyouwishtoExport.
2.ScrolltoSelectOptionandpressthescrollwheel once.
3.ScrolltoExportModelandpressthescrollwheel again to
savetheselection.TheExporttoSDscreenappears.Therst
two characters of the file name correspond to the Model List
number(01,forexample).
4.(Optional)Ifyouwishtorenamethemodellebeforeexporting
it to the SD Card:
a. Scroll to “Save to:” and press the scroll wheel. The File
Name screen appears.
b. Assign a new file name. The file name can contain up to
25charactersincludingthe.SPMleextension.
c. When you are done assigning the new file name, press
theBackbuttontoreturntotheExporttoSDscreen.
5.SelectExporttosavetheletotheSDCard.Whentheexportis
complete, the transmitter returns to the SD Card Menu screen.
Export All Models
To export all models to the SD Card:
1.SelectExportAllModelsintheSDCardMenuoptions.The
ExportAllModelsscreenappears.
IMPORTANT:ExportAllModelswilloverwriteanymodellesthat:
• Are already saved on the SD Card.
• Have the same name. Always save model files to a different SD
Card if you are not sure.
2.SelectExporttooverwritelesontheSDCardorCancelto
return to the SD Card Menu.
TRANSFER SD CARD

The SD Card enables you to:
• Import (copy) models from another DX6 transmitter
• Export(transfer)modelstoanotherDX6transmitter
• Update AirWare™ software in the transmitter
• Install/Update sound files