Manual

33SPEKTRUM DX6 • TRANSMITTER INSTRUCTION MANUAL

FUNCTION LIST



System Setup

Use System Setup to enter the System List from the Function

list without turning the transmitter off. A Caution screen will

appear that warns that RF will be disabled (the transmitter will no

longer transmit). Press YES if you are sure and want to access

the System List. If you are not sure, press NOtoexittothemain

screen and continue operation.

If you do not press YES or NO,thesystemwillexittothemain

screenandcontinueoperationwithinapproximately10seconds.

WARNING: Do not press YES unless the model is turned

off or the model is secured.

Monitor

The Monitor screen displays the servo positions for each channel

graphically and numerically. This is useful to verify programming

functions,trimsettings,mixdirections,etc.Thenumericvalueis

directlyrelativetothetraveladjustandmixvalues(e.g.,100%

travel adjust equals 100% value in the Monitor).