Version 1.06.02 Corrections & Improvements In the previous build Version 1.06.01, a change was made that unintentionally prevented the ability to enter negative numbers in Telemetry Warning screens (RSSI, G Force, etc.), causing warnings to not function in these cases. This has been corrected in version 1.06.02.
Version 1.06.01 New Features The Model Adjust and Model Setup menu lists have been re-ordered with more frequently used functions located closer to the top. Corrections & Improvements Wireless Trainer Instructor mode now maintains its bind even after the system is put into a full sleep. The "No Student Signal" trainer alert is now properly canceled when changing to a new model. In rare cases the RF would be modulating but LED would not be on. This has been corrected.
Version 1.05.03 Note: A bug has been identified that can cause an unusually long time (up to several minutes) to change models when using the quick model switch function from the Dashboard. Additional issues can include seeing a white screen during a model switch or in the Model Utilities screens. This issue only occurs if the “Dim the Display” function found in the Model Detail screen to set to anything other than “Never”.
Version 1.05.00 New Features The ability to assign a switch to cancel a timer has been added In Audio Events menu, the Macros for Rx Voltage functions now have their own group. Previously, RX Voltage was in the QOS group and was difficult to find. Corrections & Improvements Assigned RSSI warning values are now properly being displayed Telemetry Warning Pop-up screens are now clearing more reliably Sequencer Default for Speed now properly defaults and resets to 5.
Version 1.04.05 New Features Forward Programming- provides complete setup and adjustment of the AS3000 AS3X system when used with the PowerSafe Telemetry receivers. (Note that the Power Safe receiver firmware must be updated to 1.
Version 1.03.07 New Features Quick Sleep Mode- Battery life has been greatly enhanced in Quick Sleep Mode. o From the Sleep mode screen, access is available to turn WiFi and Bluetooth on/off. Long pressing the ‘Quick Sleep’ button will turn all options off and the system will enter “Full Sleep” mode in about a minute. o To minimize current consumption the LED will no longer have the ‘heartbeat’ indication of sleep mode.
Version 1.02.08 New Features Signal Strength can now be set to display Percentage, dBm or RSSI in the Flight Log telemetry screen In Sailplane mode, Throttle Stick has been added as an option in Flap to Elevator Mixing In Heli mode the pitch and throttle curve graphs now display the flight mode name such as Hold, Normal, Stunt 1, ect.
Version 1.01.03 Corrections & Improvements German Language Support- When selecting German as a Language, Spektrum AirWare is now stable.
Version 1.01.02 New Features When saving a model file as a Template, a message appears confirming that the model was successfully saved Telemetry Shortcut - On the Dashboard, when a telemetry screen is selected, long pressing the telemetry ICON at the top of the page will return to the Dashboard screen In Sailplane mode, when on the Flight Mode screen changing the flight display name also changes the name in the flight mode matrix for easier identification.
Several timer issues have been corrected including the 1 minute timer announcement When using a Curve Mix the mix values now properly correlate to the servo output values on the servo monitor When using headphones or speakers, the audio is only output on the device and not the transmitter Several issues with the Sequencers have been corrected In Servo Setup - Speed, the right and left directions adjust the speed in that proper direction regardless of the servo reversing position In sc
Model Reset now resets the Model Name The startup tone now occurs when the Airware Application is up and ready to use When changing languages from another language back to English, the text for the TX battery and Inactivity alarms returns to English Telemetry RPM Macros now properly announce the RPM value In Helicopter Mode, when reversing the collective type the throttle warning now properly warns high throttle setting
Version 1.00.
