Instruction Manual

35SPEKTRUM DX8e • TRANSMITTER INSTRUCTION MANUAL
EN
Use the Aircraft Type Screen to select wing and tail types to match
your airplane model. Diagrams and setup names show on the
transmitter screen to show the available setups.
Refer to spektrumrc.com for more information about new DX8e
AirWare software updates to support these options.
Select wing and tail types before doing any other programming.
*Selection of multiple ailerons activates the Differential menu option.
** “V-Tail A” and “V-Tail B” function as internal servo reversing. If V-Tail A
does not work correctly with your aircraft, try V-Tail B.
Wing
• Normal
• Flaperon*
• Dual Aileron*
• 1 Aileron 1 Flap*
• 1 Aileron 2 Flap*
• 2 Ailerons 1 Flap*
• 2 Aileron 2 Flap*
• Dual Rudder/Elevator
• Elevon A*
• Elevon B*
Tail
• Normal
• V-Tail A**
• V-Tail B**
• Dual Elevator
• Dual Rudder
A AUX1 servo port (left aileron)
B AILE servo port (right aileron)
C ELEV servo port (left V-tail)
D RUDD servo port (right V-tail)
E AILE servo port (left aileron)
F ELEV servo port (right aileron)
AB
Dual Aileron Wing
Type Connection
FE
Elevon Wing Type
Connection
DC
V-Tail Type
Connection
Acro Model Type
NOTICE: Refer to your airplane manual for recommended control throws.
CAUTION: Always do a Control Test of your model with the transmitter after programming to make sure your model responds
as desired.
ACRO (AIRPLANE)
Aircraft Type
Recommended Servo Connections
Icon
To change the Aircraft Icon:
1. In the Aircraft Type Screen, select NEXT at the bottom right of
the screen. This will access the Aircraft Options screen.
2. Scroll to the image and click once. Roll the scroll wheel left or
right for optional images.
3. Click on the image you wish to select.