User guide

22
23
Throttle
Deadband
The throttle deadband feature is used to reduce/eliminate the dead throttle area that exists at
neutral to the starting point of throttle and from neutral to the starting point of braking. This
area is sometimes known as deadband. As more throttle trim (also known as static brake)
is applied, more of the dead trigger area right off neutral exists. To eliminate the throttle
deadband, adjust a forward value such that your vehicle’s wheels just start to turn when the
trigger is slightly squeezed. This provides the most accurate feel and eliminates the dead
area in the throttle. To eliminate the braking deadband, adjust the brake value such that
your vehicle starts to slow down when the trigger is slightly pushed. This provides the most
accurate brake feel and eliminates the dead area when braking.
Accessing the Throttle Deadband Function
1. Turn the transmitter power switch on.
2. Press the SCROLL key to access Function mode.
3. Press the SCROLL key until TDB appears on the screen.
4. Move the trigger accordingly to adjust the forward or braking deadband.
5. Press the INCREASE or DECREASE key to select the desired value necessary to
eliminate dead area.
6. Press the SCROLL key to access Exponential mode.
7. To exit the Function mode, either turn the transmitter power switch off or press the
SCROLL and CHANNEL keys at the same time.
TDB
0
L/F
Current Value
Forward Adjustment
(depends on trigger position)
TDB
0
R/B
Current Value
Value: 0% to 100%
Clear = 0%
Brake Adjustment
(depends on trigger position)
Function Mode
To enter the Function Mode, turn on the transmitter and then press the SCROLL key. The
display will change to show the first function listed on the Function Mode flow chart as
shown below. Press the SCROLL key to scroll down through the functions one by one, as
shown in the flow chart. Once the desired function has been reached, use the CHANNEL key
to select the appropriate channel (if applicable). To adjust the values of the function, simply
press the INCREASE (+) or DECREASE (-) keys until the desired value is displayed on the
screen. To exit function mode, press the SCROLL and CHANNEL keys at the same time.
The next time you enter Function mode, you will be returned to the last function accessed.
Accessing
the Function
Mode
Mode Key
Channel Key
ST
E X P
TDB
0
R/B
ST
I00
L/F
E P A
STL
0
M I X
40
20
L A P
STS
0
TRIM
ST
THF
E X P
TH
I00
R/B
E P A
THB
M I X
THS
0
TRIM
TH
SB • TRM
AUX
L/F
E P A
AUS
0
TRIM
AUX
SB • TRM
REV • NORM
–
0
REV • NORM
–
REV • NORM
–
I00
Channel
Key
Channel
Key
Channel
Key
Channel
Key
Channel
Key
Channel
Key
Channel
Key
Channel
Key
Throttle
Deadband
(page 22)
Lap Timer (If Grip Button C is activated for Lap Timer)
(page 26)
Exponential
(page 23)
Mixing
(page 25)
Endpoint
Adjustment
(page 24)
Sub-Trim
(page 27)
Servo
Reversing
(page 27)
–
–
–
– –
–
–
–