Owner manual

16 SPEKTRUM DX2S USER GUIDE
EN
BIND
Binding is the process of teaching the receiver the
specific transmitter’s code called GUID (Globally Unique
Identifier) and storing failsafe values. When a receiver is
bound to a transmitter/ model memory, the receiver will
only respond to that specific transmitter/ model memory
(see ModelMatch below).
Note: If a receiver is not bound to a specific
model memory, it will not operate.
MODELMATCH
The DX2S features patent pending ModelMatch
™
technology that prevents operating a model using the
wrong model memory. During the binding process, the
receiver stores a code that is assigned to the specific
model that is currently selected in the transmitter. For
example: if the model that is selected in the transmitter
is model #3, when a receiver is bound to that transmitter,
the receiver will only operate when model #3 is selected.
If another model memory is selected (model #5 for
example) the receiver will not connect. If model three is
again selected in the transmitter, the receiver bound to
model #3 will connect. ModelMatch prevents operating a
model using the wrong model memory.
BINDING A RECEIVER
1. With the receiver off, insert the bind plug into the
BIND/RS port (SR3300T).
2. Powerthereceiverthroughanyportthatisnot
a 3.3V Telemetry port. The amber LED will flash
continuously, indicating the receiver is in bind mode.
WARNING: Do not power the SR3300T
throughtheLAP,TEMP,orRPMPortthe
receiver will be damaged!
3. Turn on the transmitter and make sure the transmitter
is in the desired model number you intend to use.
4. PresstheRollingSelectortoaccesstheListscreen.
5. Rotate the Rolling Selector to highlight the Bind
screen and press the Rolling Selector to access
this screen.
6. Rotate the Rolling Selector to highlight BIND.
Bind Plug
LED