NX8 Manual

25SPEKTRUM NX8 • TRANSMITTER INSTRUCTION MANUAL

Calibrating the Transmitter

1. Carefully move the gimbal sticks in a + shape moving from

left to right, then up and down. Press gently on the gimbals

at the stops to achieve an accurate calibration. Return both

gimbal sticks to the center position.

2. Select SAVE to store the calibration.

The Calibration screen stores the potentiometer endpoints for all

proportional controls. It is mandatory to complete the calibration

after changing the stick mode selection.

SYSTEM SETUP

Calibrate

Factory Reset:

Select this option to reset the NX8 back to factory settings.

Choosing this option will wipe out any settings and all models

that have been set in the NX8 programming.

WiFi Utilities

USB Settings

First start an account at SpektrumRC.com rst on your PC, Mac, or

mobile device.

1. Select WiFi Utilities. The NX8 will search for WiFi networks in

range and display the options for you to connect with.

2. Select your WiFi connection. Load the SSID and password for

connection and select Connect.

3. Select Log In and ll in your account information.

4. Select Check For Updates to check for the newest updates on

your NX8, and download them automatically.

5. If you wish to erase your registration information from your NX8

you may do so. Otherwise, select Log Out to resume normal

operation.

The USB Settings menu allows for setting the transmitter to Game

Controller mode and for easy access to the internal memory storage.

Setting the NX10 to Game Controller mode puts the system into

USB HID mode, allowing for connection to compatible simulators

directly as a game controller. The system uses the active model

and disables the RF signal. Set the Mode to Inhibit to return to

normal RF function.

Select Access Internal Storage to access the internal memory

through the USB cable without transmitting an RF signal. Click the

Back button or the roller to exit and enable the RF signal.