NX8 Manual
37SPEKTRUM NX8 • TRANSMITTER INSTRUCTION MANUAL
EN
FUNCTION LIST
TICKER TAPE
FUNCTION BAR
Ticker Tape Setup:
The screen can display up to 10 features on the bar.
Each slot can be congured to hold:
• A telemetry sensor report
• The position of an input switch
Sensor Configuration:
Pick the sensors you want to display from the list of sensors in the active telemetry
list. After selecting a sensor, congure the data to display to suit your needs.
Field:
Select the input you want to have displayed, and the amount of time it should be shown.
MY LIST SETUP
My List gives you quick access to a short list of commonly used menu items you create.
• Press the Function button to open My List
• Scroll to select the menu you want, and click to choose that option
• CLEAR will take you to the rst entry on the list
• BACK or FUNC will exit to original screen
IMPORTANT:
If a menu option is not available on the Function List such as due to a Wing/Tail type change, it will not be selectable from the My List.
IMPORTANT: You can pick entries from the Function List, however you cannot pick sub-options for the My List setup.
The Function Bar on the NX8 offers 2 features, a Ticker Tape to
show telemetry values and My List which allows quick access to
menu items chosen that are frequently used.
Playback Mode:
When the NX8 transmitter is showing the normal display (home
screen), the system shows the telemetry scrolling across the
bottom of the screen.
Configuration:
Select Function Bar on the Function List to access the setup screen.
Select the ticker tape display or the My List display for conguration.