Change Log

ManualsBrandsSpektrum ManualsHobbyNX10 10-Channel DSMX Transmitter Only

Spektrum™ NX AirWare™ Change Log

2021-July-13

Version 3.06

Changes are in comparison to version 3.05 (2021-June-22).

This change log is available online at

http://spektrumrc.cachefly.net/NXAirwareChangelogs.html

Corrections & Improvements

• Calculations for the Dual Rates/Expo function have been improved to provide

higher resolution across all settings and model types

• Sub Trim has been corrected for imported DX models to allow full range editing.

In earlier versions it was limited to 225 steps when it should have been 450. The

actual displacement remains the same.

• When displaying the TextGen screen (used for Smart ESC configuration and

some third-party products), the backlight no longer turns off after a few seconds;

it remains on as long as the TextGen Screen is displayed.

• The Ticker Tape function no longer shows “LAPTIMER” in unassigned slots.

• The Ticker Tape function now allows the addition of Flight Log data such as

Frame Losses (F), Holds (H), and receiver fades (ABRL).

• Corrected Tx Low Voltage Alarm behavior so that the warning screen includes

the Low Voltage status and immediately alarms instead of waiting several

seconds.

Summary of content (8 pages)

PAGE 1
Spektrum™ NX AirWare™ Change Log 2021-July-13 Version 3.06 Changes are in comparison to version 3.05 (2021-June-22). This change log is available online at http://spektrumrc.cachefly.net/NXAirwareChangelogs.html Corrections & Improvements • • • • • • Calculations for the Dual Rates/Expo function have been improved to provide higher resolution across all settings and model types Sub Trim has been corrected for imported DX models to allow full range editing.
PAGE 2
Spektrum™ NX AirWare™ Change Log 2021-June-22 Version 3.05 Changes are in comparison to version 3.04.01 (2021-Feb-15). This change log is available online at http://spektrumrc.cachefly.net/NXAirwareChangelogs.html New Features • • • 3 Keyboard Variants Now Available - New Keyboard option for naming models, flight modes, etc.
PAGE 3
Spektrum™ NX AirWare™ Change Log • • • • • • • • • • • • • Corrected import issues from IX12 model files. Heli Throttle/Pitch Curve setup screens now hide the buttons for inactive Flight Modes. Heli Gyro and Governor setup screens now position the data entry boxes correctly for all switch and Flight Mode configurations. After downloading an update, an instructional message now appears below the INSTALL button informing users to wait 5 minutes to help clarify the expected behavior.
PAGE 4
Spektrum™ NX AirWare™ Change Log 2021-Feb-15 Version 3.04.01 Public Beta Changes are in comparison to version 3.03.03 (2020-Dec-23). This change log is available online at http://spektrumrc.cachefly.net/NXAirwareChangelogs.html This Public Beta update has been tested fully by our internal and external beta teams, but there is a chance that users may experience unexpected behavior. If you would like to report any problems with this update, please contact us via email at airware@horizonhobby.com.
PAGE 5
Spektrum™ NX AirWare™ Change Log • Show RX Pack Capacity using A instead of mA for current.
PAGE 6
Spektrum™ NX AirWare™ Change Log 2020-Dec-23 Version 3.03.03 Changes are in comparison to version 3.02.01 (2020-Oct-26). This change log is available online at http://spektrumrc.cachefly.net/NXAirwareChangelogs.html Corrections & Improvements • • • • • • • • • • • • • • • • Flap System now supports custom aileron deflection (aka “Crow” or “Butterfly”) when using wing types 2 Ail/1 Flap and 2 Ail/2 Flap. Enabled reversing of an analog input to the flap system.
PAGE 7
Spektrum™ NX AirWare™ Change Log • • • • • • • • • Corrected the outputs for simulators for button inputs. Swap Rx Port Assign and Channel Input Assign screens. This will make it easier for new users to follow the instructions in the aircraft manuals. Corrected a Forward Programming issue for reporting Absolute Travel limits to the receiver. When downloading an update via WiFi, we now name it to prevent getting stuck after a failed download. The file is named “AirWare_V.VV.VV_SPMTX.
PAGE 8
Spektrum™ NX AirWare™ Change Log 2020-Oct-26 Version 3.02.01 Changes are in comparison to version 3.01 as shipped from the factory. This change log is available online at http://spektrumrc.cachefly.net/NXAirwareChangelogs.html Corrections & Improvements • • Forward Programming is enabled. The factory version will tell you that you need to update in order to communicate with the receivers. NX6 only: The default switch setting for the Aux2 channel is set per the table below.