S155 G2 Smart Charger Manual

Operating the Charger
Navigating the Charger
Navigation of the charger menus is accomplished
using the push buttons on the top of the charger.
• Press the Menu/Select button to select a menu
item.
• Press the Down arrow button to scroll down a
menu list.
• Press the Up arrow button to scroll up a menu
list.
• Press the Back button to return to the previous
menu.
Charge port connector selection
The charging port is capable of charging with an
IC3 or IC5 connector.
• Slide the port cover down to
use the IC3 connector.
• Slide the port cover up to use
the IC5 connector.
IMPORTANT: Do not remove the charging port
cover.
Back Down Up Menu/Select
Before operating the charger, know your battery’s
specifications and any battery-specific safety
warnings.
1. Connect the included AC cord to the charger
and appropriate power supply to power on your
Smart Charger.
2. Connect the battery to the port on the front of
the charger.
3. Connect the battery balance lead, if available,
to the balance port on the right side of the IC3
and IC5 port. Make sure the balance lead is
positioned correct all the way to the left side of
the balance port.
Smart Batteries: If charging a Spektrum Smart
Battery, the Battery Cell Count, Battery Type, Battery
Charge Current Rate and Battery Capacity are set
automatically and the charger will begin charging
automatically when the battery and the balance
lead (if available) are connected to the charger. G1
Spektrum Smart batteries are compatible with G2
Spektrum Smart chargers.
4. Press and release the menu button to display
the Charger Settings list:
5. Select the desired task.
6. Confirm the settings are correct for the battery
being charged.