XT485 Treadmill OWNER’S MANUAL Please carefully read this entire manual before operating your new treadmill
XT485 Treadmill 2
1 Important Safety Instructions 2 Important Electrical Instructions 3 Important Operation Instructions 4 XT485 Assembly Instructions 5 Folding Instructions 12 Product Features 13 Operation of Your Console 15 Programmable Features 18 Using Heart Rate Transmitter 27 General Maintenance 29 Service Checklist - Diagnosis Guide 32 Manufacturer’s Limited Warranty 34 ATTENTION This treadmill is intended for residential use only and is warranted for this application.
Preventative Maintenance Chart Vacuum Under Motor Cover & Check Wiring (Every Other Month) Clean & Inspect Deck for Lubrication (Every Other Month) Lubricate Deck (Every 180 hours or sooner if dry) Inspect Belt Tracking (Monthly) Adjust if necessary Date
Thank you for your purchase of this quality group treadmill from Spirit Fitness. Your new treadmill was manufactured by one of the leading fitness manufacturers in the world and is backed by one of the most comprehensive warranties available. Through your dealer, Spirit Fitness will do all we can to make your ownership experience as pleasant as possible for many years to come.
Important Safety Instructions When using an electrical appliance, basic precautions hsould always be followed, including the following: Read all instructions before using this appliance. DANGER - To reduce the risk of electric shock: 1. Always unplug this applicance from the electrical outlet immediately after using and before cleaning. WARNING - To reduce the risk of burns, fire electric shock, or injury to persons: 1. An appliance should never be left unattended when plugged in.
NEVER remove any cover without first disconnecting AC power. If voltage varies by ten percent (10%) or more, the performance of your treadmill may be affected. Such conditions are not covered under your warranty. If you suspect the voltage is low, contact your local power company or a licensed electrician for proper testing. NEVER expose this treadmill to rain or moisture. This product is NOT designed for use outdoors, near a pool or spa, or in any other high humidity environment.
Important Operation Instructions NEVER operate this treadmill without reading and completely understanding the results of any operational change you request from the computer. Understand that changes in speed and incline do not occur immediately. Set your desired work level on the computer console and release the adjustment key. The computer will obey the command gradually. NEVER use your treadmill during an electrical storm.
To assist you in assembling your new Spirit Fitness treadmill, we have posted an assembly video at the following link: http://www.spiritfitness.com/customerservice/video/treadmillvideos.html Pre-Assembly Please read before unpacking your folding treadmill. Serious injury could occur if this folding treadmill is not unpacked properly. There is a Velcro strap installed around the treadmill base that prevents the treadmill from unfolding accidentally during shipping.
STEP 1: Upright Tubes 1. 2. 3. Install the four speed nuts (128) onto the tabs of the frame. Take the Left and Right upright tubes (part numbers 5 & 4) and slip the upright covers (67 & 61 left, 66 & 62 right) onto the tubes (observe the cover orientation is correct). Connect the Middle Console Cable (50) that exits from the bottom of the right console mast tube with the lower Console Cable (49). NOTE: Partially tighten all bolts in this step.This will allow for easier console assembly.
7 XT485 Treadmill
STEP 2: Console 1. 2. Connect the Speed Adjustment Switch Cable (54) to the Speed Cable (Upper)(37). Connect the Incline Adjustment Switch Cable (55) to the Incline Cable (Upper)(38). Connect the Computer Cable (Middle)(50) and Computer Cable (Upper)(48). Insert Console Assembly (52) into right and left Uprights (4) and (5) and secure with four Button Head Socket Bolts (133) and four Split Washers (113) using the M6 Allen Wrench (132).
STEP 3: Base Covers 1. Attach the Frame Base Covers (Left - 61) and (Right - 62) to the Frame Base (2) with four Tapping Screws (120) using the Phillips Head Screw Driver (148). HARDWARE #120.
7 6 STEP 4: Plastic Parts 1. Attach the lower half of the bottle holder (Right - 66) and (Left - 67) to the right and left Uprights (4) and (5) and Console Support (6) with ten Sheet Metal Screws (122) using the Phillips Head Screw Driver (148). HARDWARE #122. 3.
5 150 150 150 119 4 150 STEP 5: Cross Brace 1. Attach the Cross Brace (119) between the left and right console masts (4) and (5) with four Button Head Socket Bolts (150). Tighten using the Combination M5 Allen Wrench & Phillips Head Screw Driver (131). HARDWARE #150.
Folding Instructions Do not attempt to move the unit unless it is in the folded and locked position. Be sure the power cord is secured to avoid possible damage. Use both handrails to maneuver the unit to the desired position. TO FOLD THE TREADMILL Make certain the treadmill is at minimum incline. Lift the treadmill running deck until it is secured by the locking telescoping tube assembly in center back of base.
The XT485 treadmill allows you to make speed and incline changes on the side handrails. You can also choose to turn these off if you frequently hold on to these rails. This is achieved by pressing the disable button on the right side of the lower portion of the console. Quick Speed & Incline Buttons You are able to set your speed and incline settings quickly by using the quick keys on the console.
MESSAGE CENTER The console will display Pace, Calories burned, Time (elapsed or countdown), Distance travelled, Pulse, Speed, Incline, Program Name, number of Laps completed, and Segment Time. There is also a Speed & Incline profile graph that lets you see how hard you have worked and how challenging the upcoming segments will be. HEART RATE % PROFILE The console LCD screen will display your current heart rate anytime a pulse is detected.
Integrated Speakers for MP3 player Contact Heart Rate Grips Muscle Activation Profile Heart Rate % Profile Swivel Fan to keep you cool Large LCD with feedback and scrolling message center Convenient water bottle holder and cargo compartment for keys, phone, or MP3 player Getting Started Power the treadmill on by plugging it into an appropriate wall outlet, then turn on the power switch located at the front of the treadmill below the motor cover.
Quick Start/ Manual Operation STEP 1: Press and release the Start key to wake display up (if not already on). Note: Installing the tether key will also wake up the console. STEP 2: Press and release the Start key to begin belt movement, at .5 mph, then adjust to the desired speed using the Speed + / - or Fast/Slow keys (console or hand rail). You may also use the quick speed key, then 0 through 9 to adjust the speed.
1/4 Mile Track The 1/4-mile track (one lap) will be displayed around the dot matrix window. The flashing segment indicates your progress. Once the 1/4-mile (Metric - 0.4k) is complete this feature will begin again. There is a lap counter in the message window for monitoring your distance. Pulse Grip Feature The Pulse (Heart Rate) console window will display your current heart rate in beats per minute during the workout.
Programmable Features The XT485 offers nine factory preset-programs, two user defined programs and one Manual program. Each preset program has a maximum speed level that is displayed when a desired workout is chosen. The maximum speed that the particular program will achieve will be displayed in the Speed window. Also included are two user programs (User 1 and User 2) for custom workouts.
User Programs STEP 1:Press the User 1-2 key once for User 1 or twice for User 2 then press Enter. Note that the dot matrix display portion will have a single row of segments at the bottom (Unless there is a previously stored program). If there is a program stored under the button that is pressed, it will be retrieved. If not, you have the option of programming in your first name.The message window will display and flash the letter ”A” .
Fusion Program STEP 1: Press the Fusion key. Press Enter to select the program. The display will prompt you through the programming. STEP 2: If Enter was pressed, the Message Center will now be blinking a value, indicating your Age (default is 35). Entering your correct age affects the heart rate Bar Graph Display and the Heart Rate programs. Use the + / - keys to adjust, then press Enter. Your age determines your recommended maximum heart rate.
DUMBBELL BENT OVER ROW EMPHASIS:MID/UPPER BACK & FRONT OF ARMS 1. Grasp the dumbbells with an overhand grip and arms fully extended in front of thighs; feet are spaced shoulder width apart 2. Maintain a slightly arched lower back throughout the exercise (see side view) 3. Begin the exercise by drawing your elbows up and out until there is a 90˚ bend in your elbows 4. Slowly lower the dumbbells back to the start position 5.
DUMBBELL SHOULDER PRESS EMPHASIS: SHOULDERS 1. Hold the dumbbells at shoulder height with an overhand (palms facing forward) or neutral (palms facing one another) grip 2. Press the dumbbells straight overhead until your arms are fully extended 3. Slowly lower to the start position 4. Repeat this sequence for the duration of the strength interval DUMBBELL TRICEP OVERHEAD EXTENSION EMPHASIS: BACK OF ARMS 1.
Preset Programs The XT685 has eight different programs that have been designed for a variety of workouts. Seven of these programs have factory preset Speed and Incline level profiles for achieving different goals.
STRENGTH Resistance: This program has a gradual progression of speed up to 100% of maximum effort that is sustained for 25% of workout duration. This will help build strength and muscular endurance in the lower body and gluts. A brief cool down follows. Incline: There is a quick climb to a moderate, sustained elevation that lasts the majority of the workout length. SPEED INCLINE INTERVAL Resistance: This program takes you through high levels of intensity followed by recovery periods of low intensity.
Heart Rate Programs The old motto, “no pain, no gain”, is a myth that has been overpowered by the benefits of exercising comfortably. A great deal of this success has been promoted by the use of heart rate monitors. With the proper use of a heart rate monitor, many people find that their usual choice of exercise intensity was either too high or too low and exercise is much more enjoyable by maintaining their heart rate in the desired benefit range.
Rate of Perceived Exertion Heart rate is important but listening to your body also has a lot of advantages. There are more variables involved in how hard you should workout than just heart rate. Your stress level, physical health, emotional health, temperature, humidity, the time of day, the last time you ate and what you ate, all contribute to the intensity at which you should workout. If you listen to your body, it will tell you all of these things.
1. 2. 3. 4. 5. 6. Attach the transmitter to the elastic strap using the locking parts. Adjust the strap as tightly as possible as long as the strap is not too tight to remain comfortable. Position the transmitter with the logo centered in the middle of your torso facing away from your chest (some people must position the transmitter slightly left of center).
Heart Rate Program Operation Note:You must wear the heart rate transmitter strap for these programs Both programs operate the same, the only difference is that HR1 is set to 60% and HR2 is set to 80% of the maximum heart rate. They both are programmed the same way. To start a HR program follow the instructions below or just select the HR1 or HR2 program, then the Enter button and follow the directions in the Message Center.
Dirt, dust, and hair can block air inlets and accumulate on the running belt. Please vacuum underneath your treadmill on a monthly basis to prevent excess build-up of dirt that can get sucked up and get into the inner workings under the motor cover. Every other month, you should remove the motor cover and carefully vacuum out dirt and hair that may accumulate. UNPLUG THE POWER CORD BEFORE THIS TASK.
Treadbelt Tracking Adjustment The treadmill is designed so that the tread-belt remains reasonably centered while in use. It is normal for some belts to drift near one side while in use, depending on a user’s gait and if they favor one leg. But if during use the belt continues to move toward one side, adjustments are necessary. SETTING TREAD-BELT TRACKING An 6mm Allen wrench is provided for this adjustment. Make tracking adjustments on the left side bolt. Set belt speed at 3 mph.
Belt/Deck Lubrication Procedure First, you want to clean between the belt and deck to remove any debris that may be trapped. Use a clean, non-fraying rag, t-shirt, or light towel. Halfway between the end of the treadmill and motor cover, shove the garment under the belt until you can grasp it on both sides of the belt. Drag the garment the length of the entire belt 1-2 times. Remove the garment. Do not lubricate with anything other than Spirit Fitness approved lubricant.
Service Checklist - Diagnosis Guide Problem Solution/Cause Display does not light 1. 2. 3. 4. 5. Tether cord not in position. Circuit breaker on front grill tripped. Push circuit breaker in until it locks. Plug is disconnected. Make sure plug is firmly pushed into 115 VAC wall outlet. Breaker panel circuit breaker may be tripped. Treadmill defect. Contact your Spirit Fitness dealer.
Calibration Procedure 1. Remove the safety key 2. Press and hold down the Start and Fast + buttons and replace the safety key. Continue to hold the Start and Fast key until the window displays “Factory settings”, then press the Enter key. 3. You will now be able to set the display to show Metric or English settings (Miles vs. Kilometers). To do this, press the Up or Down key to show which you want, then press Enter. 4. Make sure the wheel size diameter is 2.83 then press Enter 5.
Manufacturer’s Limited Warranty Treadmill Warranty - Effective September 15, 2010 Spirit Fitness, Inc. (Spirit Fitness) warrants all its treadmill parts for a period of time listed below from the date of retail sale, as determined by sale receipt, or in the absence of a sales receipt eighteen (18) months from the original factory shipping date.
35 XT485 Treadmill
3000 Nestle Road Jonesboro, AR 72401 - Phone: 800-258-4555 - Fax: 870-935-7611 www.spiritfitness.com © 2013 All Rights Reserved. XT485 Owner’s Manual Rev.