User Manual

21Creon
Line Inputs
You can connect and record two line signals. Besides keyboards and synths you can
connect here other external sources like preamps or channel strips. Both balanced line
inputs are routed 1:1 to the converter and monitoring section. Level adjustment is not
possible.
Specications:
1/4“ stereo jacks, unbalanced
Input impedance 10 kOhm, balanced input impedance 20kOhm
Maximum input level +22.5 dBu
Frequency Response: 10 Hz - >200 kHz
Noise: -95 dBu (unweighted, unity gain, input termination 600 Ohm)
Common Mode Rejection ratio: < -60 dBu
THD+N Ratio: 0,002 % (at1 kHz unity gain, input termination 600 Ohm)
Connections
Tip Sleeve
Ring
Content