User Manual
22Creon
Instrument Input
The Instrument input is on the front panel so it can be reached directly. It supports high
levels to allow the connection of active or passive instruments, and it has a correspon-
ding high impedance. Active instruments already feature a preamp circuit, passive do
not (only pickups). Connection examples: electric guitars and basses, acoustic guitars
with pickups, etc.
Specications:
1/4“ mono jack, unbalanced
(Sleeve=Ground, Tip=hot/Signal)
Input impedance 1.1 MOhm, maximum input level +24.0 dBu
Frequency Response: 10Hz - >200kHz
Noise): -85 dBu (unweighted, unity gain, input termination 100 kOhm
THD+N Ratio: 0,005 % (at 1kHz unity gain, input termination 100 kOhm)
IMPORTANT:
Low impedance line signals (D/A converter,
sampler, synthesizer, etc.) ought to be con-
nected to the line inputs on the rear panel.
Connections
Content