User Manual

28Creon
48 V
Use the 48V switch above the Mic Gain knob to activate the 48 Volt phantom power
to supply condenser microphones with an integrated preamp. To work correctly such
microphones require a clean, noiseless voltage, which the Creon can provide.
IMPORTANT:
First connect the microphone to the Creon and then engage the phantom power. Now
you can start to work. Once you are done, disengage the phantom power first. Wait at
least ten seconds after disengaging the 48 V phantom power, before you disconnect
the microphone from the Creon, to allow for complete discharging — otherwise you
could damage the Creon‘s input stages.
Control Elements
VERY IMPORTANT:
All condenser microphones with a balan-
ced, oating output, as well as ribbon
microphones, can be used with phantom
power. A microphone with an unbalanced
output should only be used without phan-
tom power! We recommend you to disen-
gage the phantom power for all types of
microphones except condenser micropho-
nes .
Content