User Manual
36Creon
Phones
The Creon features a powerful headphone amplier. Use the Phones volume control to
adjust the level of the headphones signal.
Headphones volume adjustment is also independent from that of the loudspeakers.
The outputs and gain are designed for headphones with impedances from 20-600
Ohms. For more details regarding the connection of headphones, refer to „Headphone
Outputs“ on page 23.
Optimal Potentiometer Control Range
The control range of the headphone amplifiers is very wide: it allows you to listen to
very high level signals with 30 Ohm headphones, as well as to detect the faintest
details in quiet passages with 600 Ohm headphones. To achieve such a wide range,
and due to component characteristics, a constant taper during the beginning of the
travel of the potentiometer cannot be guaranteed. A reduction of the overall volume
would also lower the tolerance in this initial range, but at the price of wasting power
margin. Thus, we recommend you to adjust the level above the „1“ mark to achieve the
best results.
Control Elements
Content