User Manual

39Creon
Calibration of the Monitoring System (Part 2)
Adjust the volume control until the SPL meter reaches 83dB with pink noise.
Ideally, 83dB SPL should be reached when the volume control is near the 12 o‘clock
mark.
Write down the exact value for 83dB SPL at the listening position. If it only reaches
83dB SPL above two o‘clock, increase the power amps‘ or active loudspeakers‘ input
sensitivity (higher dB value).
Conversely, you should decrease the power amps‘ or active loudspeakers‘ input sensi-
tivity (lower dB value) when it indicates 83dB SPL before reaching the 12 o‘clock mark.
Calibration of the Monitoring System
Content