Use and Care Manual

ManualsBrandsSportsman ManualsGas Snow BlowersEarth Series 18 in. Single-Stage Gas Snow Blower

Item # SSGSB99

SINGLE STAGE GAS SNOW BLOWER

INSTRUCTION MANUAL

READ ALL INSTRUCTIONS AND WARNINGS BEFORE USING THIS PRODUCT.

This manual provides important information on proper operation & maintenance. Every effort has been

made to ensure the accuracy of this manual. These instructions are not meant to cover every possible

condition and situation that may occur. We reserve the right to change this product at any time without

prior notice.

IF THERE IS ANY QUESTION ABOUT A CONDITION BEING SAFE OR UNSAFE,

DO NOT OPERATE THIS PRODUCT!

QUESTIONS? PROBLEMS? CALL US FIRST!

If you experience a problem, have questions or need parts for this product, call Customer Service at

1-866-460-9436, Monday-Friday, 8 AM - 4 PM Central Time. A copy of the sales receipt is required.

FOR CONSUMER USE ONLY – NOT FOR PROFESSIONAL USE.

KEEP THIS MANUAL, SALES RECEIPT & APPLICABLE WARRANTY FOR FUTURE REFERENCE.

Summary of content (44 pages)

PAGE 1
Item # SSGSB99 SINGLE STAGE GAS SNOW BLOWER INSTRUCTION MANUAL READ ALL INSTRUCTIONS AND WARNINGS BEFORE USING THIS PRODUCT. This manual provides important information on proper operation & maintenance. Every effort has been made to ensure the accuracy of this manual. These instructions are not meant to cover every possible condition and situation that may occur. We reserve the right to change this product at any time without prior notice.
PAGE 2
Item # SSGSB98 Gas Snow Blower FEATURES: Great for removing snow from paved surfaces, such as driveways and sidewalks. It is intended to be used by residential homeowners and is not designed for removing materials other than snow, nor is it designed for clearing off gravel surfaces. 2.4 HP / 4,200 RPM Noise Level: < 100 dB @ 0% Load 98cc OHV, 4 Stroke Air Cooled Max Working Width: 18 Inches Max Working Height: 10 Inches Max Throwing Distance: 29.
PAGE 3
RECOGNIZE SAFETY SYMBOLS, WORDS AND LABELS What You Need to Know About Safety Instructions Warning and Important Safety Instructions appearing in this manual are not meant to cover all possible conditions and situations that may occur. Common sense, caution and care must be exercised when operating or cleaning tools and equipment. Always contact your dealer, distributor, service agent or manufacturer about problems or conditions you do not understand. This is the safety alert symbol.
PAGE 4
Notice Regarding Emissions: Engines certified to comply with U.S. EPA emission regulations for SORE (Small Off Road Equipment) are certified to operate on regular unleaded gasoline and may include the following emission control systems: Three-Way Catalyst (TWC) (if equipped), and Engine Modifications (EM).
PAGE 5
• Exercise extreme caution when operating on slopes. • Never operate the machine without proper protection and other safety protective devices in place, fully working. • Never direct the discharge towards people or areas where property damage can occur. Keep children away. • • Do not overload the machine capacity by attempting to clear snow at a too fast rate. Look behind you and take care when backing up with the machine. • Never operate the machine without good visibility or light.
PAGE 6
ASSEMBLY The following items need assembly before use: 1) Installing the handle, ensure the cable is routed to outside of handle Quantity: 2 Oval-head bolts (#1) Quantity: 2 Curved washers Quantity: 2 Handle knobs (#2) 2) Position the grip around hook 3) Position chute assembly as shown. Includes knob (1), and washer and locknut (2). Install the bolts from the inside of the discharge chute assembly so that the washers and the locknuts are on the outside of the chute.
PAGE 7
PREPARING THE SNOW BLOWER FOR USE Step 1 - Add 12 ounces Oil This snow blower requires engine oil to function. When new from the package, this snow blower contains no oil in the engine crankcase. Add the correct quantity of oil before operating this snow blower for the first time. When replenishing oil for subsequent use of this snow blower, always determine that this snow blower has the correct quantity of oil. 1. Confirm that the snow blower is on a level surface. 2.
PAGE 8
Engaging the Rotor Blades Disengaging the Rotor Blades To engage the rotor blades, hold the Control Bar against the handle (figure 13). To disengage the rotor blades, the Control Bar (figure 14). Figure 13 release Figure 14 Prevent Freeze-Up After Use Let the engine run for a few minutes to prevent moving parts from freezing. Stop the engine, wait for all moving parts to stop, and remove ice and snow from the machine. Clean off any snow and ice from the base of the chute.
PAGE 9
PARTS DIAGRAM SSGSB99 Single Stage Gas Snow Blower Instruction Manual 9
PAGE 10
PARTS LIST SSGSB99 Single Stage Gas Snow Blower Instruction Manual 10
PAGE 11
EMISSION CONTROL SYSTEM WARRANTY BUFFALO CORPORATION Your Warranty Rights and Obligations The California Air Resources Board, U.S. EPA and Buffalo Corp are pleased to explain the Emission Control System Warranty on your 2018 model year outdoor power equipment engine. California In California, new spark-ignited small off-stringent anti-smog standards. Other States, U.S. Territories In other areas of the United States, your engine must be designed, built and equipped to meet the U.S.
PAGE 12
scheduled replacement date for that part. If the part fails before the first scheduled replacement, the part will be repaired or replaced by Buffalo Corp. according to the Subject (4) below. Any such part repaired or replaced under warranty will be warranted for the remainder of the period prior to the first scheduled replacement point for the part. (4) Repair or replacement of any warranted part under the warranty provisions herein must be performed at a warranty station at no charge to the owner.
PAGE 13
PAGE 14
PAGE 15
PAGE 16
PAGE 17
PAGE 18
PAGE 19
PAGE 20
PAGE 21
PAGE 22
PAGE 23
PAGE 24
PAGE 25
PAGE 26
PAGE 27
PAGE 28
PAGE 29
PAGE 30
PAGE 31
PAGE 32
PAGE 33
PAGE 34
PAGE 35
PAGE 36
PAGE 37
PAGE 38
PAGE 39
PAGE 40
PAGE 41
PAGE 42
PAGE 43
PAGE 44